I have published a new wanpipe 3.5.27 which adds support for the Sangoma GSM cards.
Please see the following threads on how to upgrade for each version
1.8xx.210.5x- Stable FreePBX 2.10 with Asterisk 1.8 and Centso 5.x http://www.freepbx.org/forum/freepbx-distro/distro-discussion-help/asterisk-1-8-stable-release-versions-for-distro
1.10xx.210.5x- Stable FreePBX 2.10 with Asterisk 10 and Centso 5.x http://www.freepbx.org/forum/freepbx-distro/distro-discussion-help/asterisk-10-stable-release-versions-for-distro
1.10xx.210.6x- Beta FreePBX 2.10 with Asterisk 10 and Centso 6.x http://www.freepbx.org/forum/freepbx-distro/distro-discussion-help/asterisk-10-beta-release-versions-for-distro
Hi,
Today i download the FreePBX-1.1007.210.62-x86_64-Full-1345231419.iso and successfully installed. Upon reboot, the "pbx first boot" install failed at "wanpipe" package installation. Then, i decided to download the package manually from http://yum.freepbxdistro.org/pbx/1.1007.210.62/x86_64/RPMS/sangoma/wanpipe and install the latest version "3.5.27", it failed with the following message.
[root@dev-asterisk ~]# rpm -ivh /tmp/wanpipe-3.5.27-kernel.2.6.32.220.13.1.el6.dahdi.2.6.1.x86_64.rpm
Preparing... ########################################### [100%]
1:wanpipe ########################################### [100%]
error: unpacking of archive failed on file /usr/include/wanpipe/sdla_gsm_demo.h;5035f54a: cpio: read failed - Bad file descriptor
Then, i try to install the 3.5.26 version, it get installed successfully.
Kindly advice on this.
Regards,
Anandhraj || www.raj2u.net
FreePBX Distro 1.1007.210.62-1
Anandhraj,
It looks like the yum repo your pulling from has a corrupt rpm. I did some testing and replaced it, so you should be able to yum install the package now. If you have any other problems please let us know.
Bryan Walters
Schmooze Com, Inc.
FreePBX Developer
Hi Bryan,
Thank you. Now im able to install the 3.5.27 version.
Regards,
Anandhraj || www.raj2u.net
FreePBX Distro 1.1007.210.62-1