incoming routes configuration

robertos1984's picture
Posted May 6th, 2009 by robertos1984 (tadpole)

Hi, I'm Roberto and I have some problems with the configuration of inbound routes. First, I desire to inform you what are the steps done which are ok:
1) Asterisk installation: ok
2) estensions configuration: ok
3) calling between estensions: ok
4) creating queues, conference and ring groups: ok
5) to obtain a clling toward an externalnumber, it's necessary to create a trunk.Now, I want to call numbers which are internal in an other PBX. In other words, Asterisk has to communicate with an other PBX, which is not Asterisk.
I create a Trunk SIP and in the OUTGOING SETTINGS section, the parameters I have configured are the following:
host=*IP address of the PBX I want to reach*
type=peer
After that I go into the OUTBOUND ROUTES section and I set what are the rules for the outgoing calls. WITH THESE SETTINGS, EVERYTHING WORKS!!!!
After that, I want to set the incoming routes: different roads I followed but the result was the same: NO INCOMING CALLS!!!
Can you help me please, specifying what can be mistakes I commit??
I wait for your response please.
Thanks so much for your help and please, sorry for my poor English.
Roberto


__________________


‹ 2.6 Incoming call recording disconnect the call Error "Only deletes recording files, not cdr log" trying to delete Call Monitor recording from Voicemail User Portal ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

At a minimum, you

8f27e956's picture
On September 19th, 2009 8f27e956 (tadpole) said:

At a minimum, you need

host=*IP address of the PBX I want to reach*
type=friend
context=from-trunk

Reload. After which you can monitor the call progress with

$ asterisk -r
cli> core set verbose 3
cli> <watch the call flows here>

/S