Symlink problems

kevinb's picture
Posted March 6th, 2011 by kevinb (tadpole)

Hay all, I'm running the latest PIAF Purple with Asterisk 1.8.2 and installed the latest FPBX beta 2.9 this evening. Everything went fine, however I am now getting a constant error on the System Status Page. This is what I get:

retrieve_conf failed to sym link:
/etc/asterisk/ccss.conf from campon/etc
This can result in FATAL failures to your PBX. If the target file exists and not identical, the symlink will not occur and you should rename the target file to allow the automatic sym link to occur and remove this error, unless this is an intentional customization.
Added 2 minutes ago
(retrieve_conf.SYMLINK)

Any ideas? Thanks!

Kevin


__________________


‹ cant make calls, then MISDN advice please Asterisk 10 ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

delete the copy of ccss.conf

p_lindheimer's picture
On March 6th, 2011 p_lindheimer (Developer) said:

delete the copy of ccss.conf that is in /etc/asterisk, the campon module provides it's own auto-generated version.


__________________

Philippe Lindheimer - FreePBX Project Leader
FreePBX Training Opportunities - Click Here
Get Official Paid Support - Click Here


I have deleted ccss.conf yet

jeff.h's picture
On March 13th, 2011 jeff.h (tadpole) said:

I have deleted ccss.conf yet the error message persists.


you need to press the orange

p_lindheimer's picture
On March 13th, 2011 p_lindheimer (Developer) said:

you need to press the orange apply configuration bar again for it to go away.


__________________

Philippe Lindheimer - FreePBX Project Leader
FreePBX Training Opportunities - Click Here
Get Official Paid Support - Click Here


I would if there was one

jeff.h's picture
On March 13th, 2011 jeff.h (tadpole) said:

I would if there was one :-)

I have also rebooted several times as well as the re-read configs link.


How i fixed it

Steel Reign's picture
On December 7th, 2011 Steel Reign (tadpole) said:

In terminal delete the ccss.conf and the sip_notify.conf. Then went to the Module Admin in FreepBX. Un-installed Comp-On module, applied changes. Click the infamous "orange bar" and then install the Comap-On module again. This re-creates the files and clears the Symlink error message.

Good luck hope this works for you.

Steel Reign


__________________

Steel Reign


for what it's worth, yes

cowboyway's picture
On January 8th, 2012 cowboyway (tadpole) said:

for what it's worth, yes that little procedure did the trick to clear the warning... thanks