2 phones, 1 IP, blind transfer
I have Siemens Gigaset A580IP and Asterisk 1.6.0.21. 2 phones is on 1 IP (IP address get base). If i transfer a call (with ##) from the first headphone to another, so the IP address of the occupied. I would like to hang, hold, and call for the release of IP call to establish. Is it possible to implement?
__________________
News Announcements
New Forum Topics
- no inbound calls showing up in monitor section
- Yum won't update
- Need ability to have weather announcment on a special voicemail.
- Disabling Enum
- End-Point-Manager over Internet
- Freepbx 2.10 Recordings portal not working
- Error with style after upgrade
- Soft phone for iphone
- hi ,can anyone help me please ,i want to add custom port 7060 after my domin
- only group 0 shows up in trunk drop down list.
- Day/Night BLF
- Errors with "ARI" After update, Asterisk Failure and Interface won't load
Are you trying to have two
Are you trying to have two phones with the same IP address. That is both have, for example, 192.168.12.15?
BF
Bill/W5WAF
IT Specialist
City of Vicksburg, MS
Yes. Command "sip show
Yes.
Command "sip show peers":
21/21 192.168.1.150 D N A 5060 OK (104 ms)
11/11 192.168.1.150 D N A 5060 OK (104 ms)
Connections works. On both phones I connect them and occupancy. The problem is only in transfer.
Ok... You can't have two
Ok...
You can't have two devices on the network with the same IP address.
I'm really unsure what you're trying to accomplish, but FreePBX is so flexible that I'm sure there is a configuration for it...
Bill
Bill/W5WAF
IT Specialist
City of Vicksburg, MS