How to load most current SIP firmware loads to FreePBX, for dissemination

3 posts / 0 new
Log in or register to post comments
Last post
Fri, 07/13/2012 - 10:53
#1
tn-it
tn-it's picture
How to load most current SIP firmware loads to FreePBX, for dissemination

Forgive the noobness of this question, as I'm just getting familiar with the FreePBX product.

Can someone point me at the specific directions for how to have an OEM vendor's most current SIP firmware load (Polycom and Aastra mostly), be loaded to the EndPoint Manager so that I can be sure my phones have the absolute most current firmware to rule out any issues being "phone firmware" related?

Top
Thu, 07/19/2012 - 10:19
vegastech
vegastech's picture
Just as an FYI, loading the

Just as an FYI, loading the newest firmware to phones is not always the best solution without thorough testing.

There's a thread somewhere here about another guy as well as myself having odd issues with Aastra 6757i phones. The fix was to downgrade to the previous firmware.

Top
Thu, 07/19/2012 - 11:13
alan_mousty
alan_mousty's picture
If I recall the newest

If I recall the newest Polycom UCS 4.x firmware is far different than the 3.x versions. Before you go and load it up you might look into the differences.

Here is a little info on the newest version.

http://community.polycom.com/t5/VoIP/Software-UCS-4-0-1-has-been-released/td-p/6854

Top