Mitel 53XX Phones

10 posts / 0 new
Last post
tptech302
tptech302's picture
Mitel 53XX Phones

I have several Mitel 53XX Phones I am trying to set up on FreePBX. These phones have the latest firmware on them. I have them set for SIP protocol, and appear to be pulling the config, since I get the User name on the display, but says no proxy configured, when I try to make a call. I have tried to web into the phone, but what I thought should be the default username and password based on what I have found online, doesn't work. Does FreePBX create it's own user and password for web access, or how do I configure the phone for the user and secrete, for the SIP extension I created?

tptech302
tptech302's picture
Also looking for some

Also looking for some information on programing BLF buttons also, if I can get the phone to work. Thanks in advance

niacs
niacs's picture
Hi, if the phone i

Hi, if the phone i registered at the PBX and you still cannot dial, check if you have at least one button programmed al Line Key for the configured account.

If you would like to use the BLF function than program a Key als DSS&BLF and set the extension nummer in the data field, than add this number to the BLF List on the Account config page, if you need more than one extension enter them as comma seperated list.

Remember only INUSE of NOT_INUSE will work with the Mitel SIP firmware you doe not have a RINGING state signalled on the phone.

When logging in to the Web UI of the phone does not work be sure you have the correct password, this is provisioned though the config file, its encrypted in there but i dont know how, i just changed the user and pass in a phone an exported the config and used this as a base. (now al my phones use the default Mitel 5220 password Wink even the 53xx series)

using the code below in the MN_General.xml will set the pass to : admin/5220

   admin
   Administrator
   29c4a0e4ef7d1969a94a5f4aadd20690

Regards,
Richard

----
New Image ICT www.newimage.nl

tptech302
tptech302's picture
OK I will give that a try

OK I will give that a try later on. I saw that in the xml file and thought that might be it, but didn'y know how or what to change. This is probably going to sound stupid, but where do I check to see if I have a line key programed... in the conf file... What should it look like? I'm guessing the BLF buttons are programmed through the WEB GUI of the phone then, I didn't see and options in the FreePBX for thrm. I have Cisco and Aastra phones working fine, but am really partial to the Mitel phones and would like to use more of them.

Thanks Josh

niacs
niacs's picture
Hi tptech302,

the best place to start is with an exported config, this will tell you the most, be carefull not to use the exported config directly, it will set some stuff fixed, but it will get you going.

Below you find the file MN_{mac}.cfg i'am using (taken from a 5220)

- Replace all the ${} parameters with you settings
- Update the phone Model= and parameter with the phones firmware otherwise the phone will ignore the file
- Be sure to create at least ONE with a line for the extension you have configured in the
- Key Features are : Fea=
-- Fea=6 => Line 1 Key
-- Fea=7 => Line 2 Key
-- Fea=27 => DSS/BLF Key

Best way to set the keys is by GUI them export settings en Cut relevant parts.


   0
   {$hostname}
   ${domain}
   
      
      
      
      
      
      
      
      
      
      
      
      
      
      
   
   
      
   
   R7.2
';

Hope it helps.
Richard

----
New Image ICT www.newimage.nl

tptech302
tptech302's picture
Making progress

Well I am making progress... Phone boots, runs news feed. But still get "No proxy configured" when trying to dial out?

Here is what I have


   1
   1
   0
   1
   02.00.00.31
   R8.0.02.01.01.01
   0
   0
   0
   5060
   0
   -1
   -1
   sip1
   -example.com
   0
   0
   
   0
   
   
   
   
   
   
   
   1
   12
   1
   1
   0
   1
   http://rss.news.yahoo.com/rss/topstories
   192.168.4.200
   192.168.4.200
   192.168.4.200
   -5
   2
   7200
   
   0.0.0.0
   5060
   5
   20
   0
   0
   101
   0
   0
   
   0
   0
   10
   
   1
   60
   0
   
   ******
   0
   0
   0
   0
   admin
   Administrator
   29c4a0e4ef7d1969a94a5f4aadd20690
   0
   
   0
   
   0
   0
   4
   
   0
   0
   0
   
   0
   0
   0
   
   0
   0
   0
   
   0
   0
   0
   
   0
   0
   0
   0
   0
   0
   0
   0
   0
   0
   0
   0
   0
   0
   0
   1
   0
   80
   443
   1
   4
   1
   0
   0
   
   0
   
   
   0
   20000
   20998
   0
   0
   3
   0
   en_US
   US
   1
   3
   2
   1
   11
   1
   1
   2
   201
   192.168.4.200
   192.168.4.200
   1
   
   0
   3
   0
   0
   0
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   0
   0
   
      
      
      
      
      
      
      
      
      
      
      
      
      
      
      
      
      
      
      
      
      
      
      
      
   
   
   1
   1
   1
   1
   1
   0
   ******
   1440
   1
   1440
   23
   59
   1
   
   5d41402abc4b2a76b9719d911017c592
   
   sip
   *97
   1
   
   90
   
      
   
   192.168.4.35
   192.168.4.1
   255.255.255.0
   
   
   
   
   192.168.4.1
   0.0.0.0
   R8.0
   9
   ******
   ******
   ******
   *98
   1800
   

tptech302
tptech302's picture
???

Well that didn't post right

tptech302
tptech302's picture
I want to post my config,

I want to post my config, but can't get it to take it???

tptech302
tptech302's picture
All working now! Phone works

All working now! Phone works great! Can I use this config for any Mitel Dual Mode phone, and just change the model and software in the to match the phone I'm setting up?

Thanks again Josh

tptech302
tptech302's picture
Help with BLF/DSS Buttons on 5312 and 5224 Mitel Phones

Looking for some help on getting BLF/DSS buttons working on a Mitel 53xx and 52xx phones