Park Caller ID

9 posts / 0 new
Last post
b_med
b_med's picture
Park Caller ID

When I dial 71 to pickup a parked call all that shows in my display is 71, which makes sense. I want to be able to see the callers caller ID. I have been spinning my wheels on this and have had no luck I'm using FreePBX 2.5.2.5 with cisco spa509g phones. Thank

tonyclewis
tonyclewis's picture
You would need to upgrade to

You would need to upgrade to FreePBX 2.10 and Asterisk 1.8 for this to work.

Tony Lewis
Schmooze Com/FreePBX
Opening a Bug or Feature request demo video

b_med
b_med's picture
Park caller id

No other way around it? I am using a Xorcom box, it doesn't currently use any pri or fxo cards, but if i needed to install them those cards are not supported beyond Asterisk 1.4

b_med
b_med's picture
Upgraded

I'm currently using elastix and installed it fresh, but it only took freepbx to 2.8.1.4. Is that far enough to accomplish receiving caller id, or does it have to be 2.10? If it is far enough how do I show caller id?

Thanks

tonyclewis
tonyclewis's picture
No it has to be 2.10 FreePBX

No it has to be 2.10 FreePBX and Asterisk 1.8 plus your phones have to Connected Line State and setup your extensions with the proper trustpid and sendrpid setting in FreePBX for your phone.

Tony Lewis
Schmooze Com/FreePBX
Opening a Bug or Feature request demo video

AdHominem
AdHominem's picture
Tony, With an Aastra phone,

Tony,

With an Aastra phone, is Connected Line State supported and active by default?

If not, how do you enable it?

Once it is enabled on the device, do you just need to enable Send RPID and Trust RPID in the extension settings?

I may add this to the documentation that I'm working on..

Other stuff that I've written:
Prepaid Wireless FAQ: http://goo.gl/CkZcf - Straight Talk Wireless FAQ!: http://goo.gl/Sn0Pk
Choosing the best Wifi Channel: http://goo.gl/0s3Rj

tonyclewis
tonyclewis's picture
Yes Aastra does support it.

Yes Aastra does support it. You set the extension to the P-Asserted Identity in the extension page of FreePBX. I also think this only works with the FreePBX Distro as we did a few patches to Asterisk 1.8 for this to work correct. I believe these patches made it into Asterisk 10.

Tony Lewis
Schmooze Com/FreePBX
Opening a Bug or Feature request demo video

AdHominem
AdHominem's picture
At some point, I'm going to

At some point, I'm going to have to upgrade to the latest Distro, but everytime I try to install it, I find a major bug, ie. it doesn't install, Asterisk logging not configured, etc... Smile

Other stuff that I've written:
Prepaid Wireless FAQ: http://goo.gl/CkZcf - Straight Talk Wireless FAQ!: http://goo.gl/Sn0Pk
Choosing the best Wifi Channel: http://goo.gl/0s3Rj

b_med
b_med's picture
Worked like a charm

Tony

Thanks for pointing to the only solution for my problem. I really like what you guys did with 2.10.