Asterisk1 up and running but not linking up to VOIP phone system
Folks
I have green lights on all key stats on the panel window and have created a new extension to link up to my voip linksys 821 phone but for some reason the phone is not giving me a dial tone when I enter the details of the pbx system. I have an IP address and my router can see the pbx and I can log into the panel from my pc but for some reason the pbx is not giving my phone a dial tone. I had this working previously would appreciate any support at all. Regards Paul
__________________
News Announcements
New Forum Topics
- Reports Abbreviations
- Bulk DID Import Failing...
- NEW Project
- Amazon EC2 - Asterisk 1.8.12 - FreePBX 2.9 - Inbound YES - Outbound NO - PLS HELP
- TFTP Boot Files in asterisk
- Grandstream
- Inbound Call Screening with No memory
- Incoming calls dropped
- Blackberry recieves mixed pager formats
- Needing a few missing phones.
- FYI: Aastra phones, VLAN not working
- incoming-inbound-call-to-home-server-with-dynamic-ip-behind-NAT-with-SPA1001
Try these tests.. From the
Try these tests..
From the phone - dial *65 and it will play back your extension.
From the command line: type sip show peers and see if your phone is registered to the PBX.
From the PC: use a soft client and with the same user details, see if the softclient can log into the PBX.
Even though you are not getting dial tone, can you make calls out ? Can you receive calls in ?
FYI, dial tone is not needed for successful operation of the phone system, it is simply a 'comfort' feature added to reassure people that that the phone is operational.
Configuring for NT mode
This is the definitive guide for Zaptel configuration take a look at the pri_net line type.
Thank you for your support
Thank you for your support and direction
From the phone - dial *65 and it will play back your extension. YES THE PHONE RECOGNISES MY EXTENSION AS 202.
From the command line: type sip show peers and see if your phone is registered to the PBX.
THE "SIP SHOW PEERS" COMMAND IS NOT RECOGNISED AS A COMMAND IN THE PBX SERVER SYSTEM. HOWEVER I LOOKED WITHIN THE LINKSYS VOIP PHONE ON THE PC USING THE IP ADDRESS AND THE PHONE IS LISTED AS BEING REGISTERED.
From the PC: use a soft client and with the same user details, see if the softclient can log into the PBX. THE SOFTFONE IS CONNECTING HOWEVER I CANNOT HEAR VOICES ON EITHER END WHEN I CONNECT WITH A PHONE CALL
Even though you are not getting dial tone, can you make calls out ? Can you receive calls in ?
I AM GETTING A DIAL TONE AND CAN MAKE CALLS OUT AND RECEIVE IN THE ISSUE IS I CANNOT HEAR ANYONE ONCE I CONNECT TO THE CALL.
FYI, dial tone is not needed for successful operation of the phone system, it is simply a 'comfort' feature added to reassure people that that the phone is operational.
hooking up asterisk to blueface
I just checked my blueface call history and made some calls from the softfone and the deskfone and I am being charged for the calls the issue is I cannot hear anyone on the calls.