More than one DID per trunk?

mutso's picture
Posted March 6th, 2008 by mutso (tadpole)

I have my FreePBX working, but I had a question about implementation.

I have a range of DIDs. They are sequential. Do I need to setup an incoming TRUNK for each DID or is there an easier way?

For example, I am currently setting up an SIP trunk per DID? Is this the most efficient way to do this?

THanks,

Peter


__________________


‹ Fatal error about DB::Iserror() ARI broken.... ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

use patterns

LILO's picture
On March 6th, 2008 LILO (tadpole) said:

do u mean 'inbound routes'?

if so
use patterns if several dids have the same destination
http://www.voip-info.org/wiki/index.php?page=Asterisk+Dialplan+Patterns

if dids must go to different dest u have to create many inbound routes one per dest


SETUP - TRUNKS - EDIT SIP TRUNK

mutso's picture
On March 6th, 2008 mutso (tadpole) said:

I have subscribed 10 DIDs from my local IP VoIP provider. This gives me 10 local Sydney DIDs.

Currently, I have setup 1 SIP Trunk per DID (local number). Therefore I have 10 trunks. Is there anyway to have 1 Trunk asscociate to this particular provider but have all 10 DIDs associated with the 1 trunk versus having 10 separate trunks.


it depends on if your

p_lindheimer's picture
On March 6th, 2008 p_lindheimer (Developer) said:

it depends on if your provider will allow a single registration but send you all your DIDs to it, assuming you register. Many do operate that way and it is much more convenient.


__________________

Philippe Lindheimer - FreePBX Project Leader
FreePBX Training Opportunities - Click Here
Get Official Paid Support - Click Here


Thanks!

mutso's picture
On March 7th, 2008 mutso (tadpole) said:

Ok spoke to my provider and they will send me all my DIDs down the one trunk. thanks for the advice.