Open Source Training Seminar


Not Logged in - No Account?

Logging in allows you to post to forums, track new posts, subscribe to threads, pm (private message) other members, and receive periodic news letters. Once logged in this message disappears. No account? Create one by registering here. Lost your password, request a new password. We respect your privacy and collect minimal information when you register and we do not resell that information or use it in any objectionable way. You can review our privacy policy for details.


Not able to activate Door opener

chitoarias's picture
Posted May 21st, 2008 by chitoarias (Leap Frog)

I need to dial ** in order to open a door, I desactivated the ** feature from Feature Code Admin, but still no tones are sent, any ideas?, in advance thank you for your help .......


__________________


‹ Setting up SIPURA SPA3K Looking for upgrade help. ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

That's not much information

KodaK's picture
On May 21st, 2008 KodaK (Leap Frog) said:

That's not much information to go on, but try doing "**#" where ever you're doing "**" now. If that doesn't work, you're going to need to provide more information about your setup.


The setup is as follows:

chitoarias's picture
On May 21st, 2008 chitoarias (Leap Frog) said:

Thank you for the answer, the setup is as follows:

Asterisk Ver. 1.2.26.1
FreePBX 2.3.1.3
Viking doorphone and door opener
connected to a Linksys SPA3102 trunk port,

The doorphone is working ok, can talk properly, but dialing ** doesn't activate the door opener (buzzer), I did try **# that didn't work


Where are you dialing the **

SkykingOH's picture
On July 13th, 2008 SkykingOH (Leap Frog) said:

Where are you dialing the ** from? From a trunk inbound to the server or from an internal extension?

You may be better off attaching these devices to a Zap board in the server. Zap channels can be customized for duration of tone and even set the levels (amplitude) of the line.

The door opener map be very sensitive to how the DTMF is presented.

Scott


SPA 942 failes to register

PaulValoi's picture
On July 11th, 2008 PaulValoi (tadpole) said:

So got the freepbx up and a SPA942 running all on an internal lan. If I set the 942 to call without authorization, I can place calls. Of course I cannot receive call on the 942. Yes, the SPA has current sofware Os installed.

Has anyone got a working config that I can compare my work against?

Thanks
Paul


Please do NOT hijack a

fskrotzki's picture
On July 11th, 2008 fskrotzki (Contributor) said:

Please do NOT hijack a thread about one thing for something else.

it is rude to the origional poster who probably get's e-mail notices of new messages and the people who can help you with a SPA942 are clearly NOT going to be looking at messages about door openers. There might be somebody who knows both but you've reduced your access to possible answers from 100% possible to maybe 1%.

Please post as a new topic.