casual dial

john2295's picture
Posted June 26th, 2008 by john2295 (tadpole)

How do I add casual dialing , is it only here at the outbound route page? Below is what I currently have..

1411
311
911
011.
1NXXNXXXXXX
NXXNXXXXXX
NXXXXXX


__________________


‹ Inbound Anonymous CID Route failure using codec ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

exactly what do you mean by

fskrotzki's picture
On June 26th, 2008 fskrotzki (Contributor) said:

exactly what do you mean by casual dialing? The outbound routing and a given route should contain all the valid patterns you want to allow out on a given route.


CASUAL

john2295's picture
On June 26th, 2008 john2295 (tadpole) said:

1010288
EXAMPLE
101028814073241234


PIC or CIC is what you mean.

fskrotzki's picture
On June 26th, 2008 fskrotzki (Contributor) said:

ok you mean long distance carrier code aka PIC or more commonly known as CIC "Carrier Identification Code".

In that each code must start with 101 followed by 4 digits You can do 101. or 101XXXX1NXXNXXXXXX


casual

john2295's picture
On June 26th, 2008 john2295 (tadpole) said:

Thanks man...


Do you want the outbound

radpeter's picture
On June 26th, 2008 radpeter (tadpole) said:

Do you want the outbound route to only process the numbers starting with 1010288, or do you want the numbers which are processed by this outbound route to be automaticly prefixed by 1010288 ? If the latter, you might opt for dialpatterns like _1010288+1NXXNXXXXXX

You could also use a prefix on your trunk, but this might pose a problem if a trunk is shared by multiple PIC/CIC