adding new route/trunk for international calls?
First I want to thank the developers of FreePBX for great software!
I am absolutely new to freepbx. I followed instruction on http://slickdeals.net/forums/showthread.php?t=1480557&page=107 to set up free USA incoming/outgoing calls with googlevoice, sipgate and Pap2. it works great!!
now I want to config freepbx so that all international outgoing calls to use another voip provider: nonoh. it does provide sip. could anyone walk me through the steps needed for this?
Thank you!
__________________
News Announcements
New Forum Topics
- no inbound calls showing up in monitor section
- Yum won't update
- Need ability to have weather announcment on a special voicemail.
- Disabling Enum
- End-Point-Manager over Internet
- Freepbx 2.10 Recordings portal not working
- Error with style after upgrade
- Soft phone for iphone
- hi ,can anyone help me please ,i want to add custom port 7060 after my domin
- only group 0 shows up in trunk drop down list.
- Day/Night BLF
- Errors with "ARI" After update, Asterisk Failure and Interface won't load
First create a trunk to the
First create a trunk to the VoIP provider (SIP, IAX2, etc..) and name it.
Then create an outbound route that uses a special key sequence like dial 8 then 10 digits that connects to the new trunk. It would look like 8|xxxxxxxxxx or something like that.
Eugene Blanchard
Author of PBX in a Flash for Newbies and Introduction to Data Communications
International call over GV/Sipgate
I have a similar questions. What I need is to make international call over the same GV/Sipgate setup of Orgasmatron 5.1 with SPA 3102, which has been working great for domestic calls but when I make international calls it told me the number cannot be connected. I made call directly using the GV number and it worked fine. I tried using softphone and it does not work either so I guess it is the issue with FreePBX setup. Could you tell me what I need do? Really appreciate that.
Twinclouds
Thank you.
Thank you.
check your dial pattern to
check your dial pattern to see if you added international.
But check where? In Trunks
But check where? In Trunks or outbound routes and which one.
I guess not the sipgate Trunk because it is for inbound. Do I need to add international dial pattern in ENUM Trunk or any others? For outbound routes, should I add to GV route or anyone else. Thanks for your help.
Twinclouds