unable to route call through a trunk

michael_e6's picture
Posted February 22nd, 2009 by michael_e6 (tadpole)

hi

i have a trixbox with 1 sip trunk, when i try to make an out going call through trunk i get the following

<--- Reliably Transmitting (NAT) to 87.194.34.246:5060 --->
SIP/2.0 407 Proxy Authentication Required

Via: SIP/2.0/UDP 87.194.34.246:5060;branch=z9hG4bK-12296b-46f1cc5a-19546663;received=87.194.34.246

From: "2005";tag=80b02220-57c222f6-13c4-12296b-756d0f02-12296b

To: "02084744553";tag=as2669b608

Call-ID: 80aff100-57c222f6-13c4-12296b-36aa267 5-12296b@192.168.1.210

The To line "sip:02084744553@192.168.1.210:5060" should go to the sip provider but its going to the local address of the trixbox.
how do i get this to route to the sip trunk.

i have a default route pointing everything to this trunk as i only have one trunk
thanks


__________________


‹ Help - Dialing Out Vega 50 - 8 FXO ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

NAT enabled in extension?

blanchae's picture
On February 24th, 2009 blanchae (tadpole) said:

Just a shot in the dark but do you have NAT enabled in the SIP extension setting?


__________________

Eugene Blanchard
Author of PBX in a Flash for Newbies and Introduction to Data Communications


First of all, Trixbox has

wiseoldowl's picture
On February 24th, 2009 wiseoldowl (Contributor) said:

First of all, Trixbox has forked FreePBX so you should probably ask this question in a Trixbox forum and let them deal with it, or switch to one of the distributions that uses true FreePBX such as Elastix, PBX in a Flash, AsteriskNOW, etc. In any case, without seeing your trunk configuration it's almost impossible for any of us to offer specific help - but I also think people would be more willing to assist you here if you were using true FreePBX, not the silly rabbit forked version which differs from the original in ways unknown to us.