ZAP Channel DID's for Outgoing Calls

imdabest's picture
Posted May 18th, 2009 by imdabest (tadpole)

Hi,

Is it possible to use ZAP Channel DID feature for outbound calls?

I have One company Using Asterisk with Zaptel+FreePBX another on second floor using legacy PBX system I am planning to connect 2 extensions from legacy pbx to zaptel so ground floor can still stay in-touch with 1st floor after being replaced by Asterisk as it's main PABX.

I have 4 Port Zaptel with to PSTN lines connected

the only problem is that when someone try to contact 1st floor it uses the PSTN line where i wan't it to use Channel which has extension from old pbx channel 3 and 4.

your help will be appreciated.

Regards,

Best


__________________


‹ Ext out of house PBX in a Flash & SPA-3102 Initial Setup Help ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Could you explain your setup

jmullinix's picture
On May 18th, 2009 jmullinix (Leap Frog) said:

Could you explain your setup a little better. I am not sure I understand how you have these two pbx's arrange. Could you tell how you have upstairs connected to downstairs.


__________________

John Mullinix, Cohutta.Com, Inc.
1-706-632-3343 -- sip://17066323343@qth.cohutta.org
Looking for Dundi peers in Baltimore, MD and Lake Wales, FL USA


ok

imdabest's picture
On May 24th, 2009 imdabest (tadpole) said:

1st Asterisk PBX with 4 PORT zap analog.

Ground floor old legacy PABX Panasonic.

I wan't to be able to dial to all extensions which are connected with panasonic.

i have two ports free on my zap card.

Regards,

Best