Peer Details

Trunk Name: VoipBuster

disallow=all

allow=alaw&ulaw&gsm

context=from=pstn

dtmfmode=inband

fromdomain=sip1.voipbuster.com

fromuser=<your username or user number>

host=sip1.voipbuster.com

insecure=very

nat=yes

qualify=yes

secret=<your password>

srvlookup=yes

type=friend

username=<your username or user number>

Register String:

<Username or User Number>:<password>@sip1.voipbuster.com/<Username or User Number>

Note: Incoming setting is not required with newer versions of TrixBox.

If you have an inbound number, an Inbound route is required to
forwarded your incoming call to a destination extension or IVR menu:

Inbound Route:DID: <User inbound Number>

No Fax

(Source Ref: Florent Chandelier)

‹ ViaTalkupVoip.com ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Use diallow=all BEFORE allow statements in newer FreePBX version

wiseoldowl's picture
On August 9th, 2008 wiseoldowl (Contributor) said:

It appears that in newer versions of FreePBX you must put disallow=all BEFORE any allow= statements or it doesn't work properly.


wiseoldowl, I'm assuming you

fskrotzki's picture
On August 11th, 2008 fskrotzki (Contributor) said:

wiseoldowl,

I'm assuming you mean * 1.4. Do you know if that also will apply to * 1.6? Only reason I ask is that these pages last long enough that reading them 1.5 or 2 years from now newer will mean something then it does today (Aug, 2008).