root/freepbx/branches/2.9/amp_conf/htdocs/admin/i18n/amp.pot

# This file is part of FreePBX.
#
#    FreePBX is free software: you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation, either version 2 of the License, or
#    (at your option) any later version.
#
#    FreePBX is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License
#    along with FreePBX.  If not, see <http://www.gnu.org/licenses/>.
#
# FreePBX language template for amp
# Copyright (C) 2008, 2009, 2010, 2011 Bandwith.com
#
msgid ""
msgstr ""
"Project-Id-Version: FreePBX\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2011-03-10 19:10+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"

msgid "Tools"
msgstr ""

msgid "Setup"
msgstr ""

msgid "Call Cost"
msgstr ""

msgid "FreePBX Administration"
msgstr ""

#, php-format
msgid "Exit code was %s and output was: %s"
msgstr ""

#, php-format
msgid "Could not run %s script."
msgstr ""

#, php-format
msgid "Reload failed because retrieve_conf encountered an error: %s"
msgstr ""

msgid "retrieve_conf failed, config not applied"
msgstr ""

msgid ""
"Reload failed because FreePBX could not connect to the asterisk manager "
"interface."
msgstr ""

msgid "Successfully reloaded"
msgstr ""

msgid ""
"Could not reload the FOP operator panel server using killall -HUP op_server."
"pl. Configuration changes may not be reflected in the panel display."
msgstr ""

msgid "Could not reload FOP server"
msgstr ""

msgid ""
"Successful reload, but could not clear reload flag due to a database error: "
msgstr ""

msgid "Add"
msgstr ""

msgid "Module Administration"
msgstr ""

#, php-format
msgid ""
"Warning: Cannot connect to online repository (%s). Online modules are not "
"available."
msgstr ""

#, php-format
msgid ""
"Warning: Error retrieving updates from online repository (%s). Online "
"modules are not available."
msgstr ""

msgid "Please wait while module actions are performed"
msgstr ""

#, php-format
msgid "Downloading %s"
msgstr ""

#, php-format
msgid "Error(s) downloading %s"
msgstr ""

#, php-format
msgid "Error(s) installing %s"
msgstr ""

#, php-format
msgid "%s installed successfully"
msgstr ""

#, php-format
msgid "Error(s) enabling %s"
msgstr ""

#, php-format
msgid "%s enabled successfully"
msgstr ""

#, php-format
msgid "Error(s) disabling %s"
msgstr ""

#, php-format
msgid "%s disabled successfully"
msgstr ""

#, php-format
msgid "Error(s) uninstalling %s"
msgstr ""

#, php-format
msgid "%s uninstalled successfully"
msgstr ""

msgid "Return"
msgstr ""

#, php-format
msgid ""
"%s cannot be upgraded: %s Please try again after the dependencies have been "
"installed."
msgstr ""

#, php-format
msgid "%s %s will be upgraded to online version %s"
msgstr ""

#, php-format
msgid "%s %s will be re-installed to online version %s"
msgstr ""

#, php-format
msgid "%s %s will be downgraded to online version %s"
msgstr ""

#, php-format
msgid ""
"%s cannot be installed: %s Please try again after the dependencies have been "
"installed."
msgstr ""

#, php-format
msgid "%s %s will be downloaded and installed"
msgstr ""

#, php-format
msgid "%s %s will be upgraded to %s"
msgstr ""

#, php-format
msgid "%s %s will be installed and enabled"
msgstr ""

#, php-format
msgid ""
"%s cannot be enabled: %s Please try again after the dependencies have been "
"installed."
msgstr ""

#, php-format
msgid "%s %s will be enabled"
msgstr ""

#, php-format
msgid ""
"%s cannot be disabled because the following modules depend on it: %s Please "
"disable those modules first then try again."
msgstr ""

#, php-format
msgid "%s %s will be disabled"
msgstr ""

#, php-format
msgid ""
"%s cannot be uninstalled because the following modules depend on it: %s "
"Please disable those modules first then try again."
msgstr ""

#, php-format
msgid "%s %s will be uninstalled"
msgstr ""

msgid "Errors with selection:"
msgstr ""

msgid ""
"You may confirm the remaining selection and then try the again for the "
"listed issues once the required dependencies have been met:"
msgstr ""

msgid "Please confirm the following actions:"
msgstr ""

msgid "Upgrades, installs, enables and disables:"
msgstr ""

msgid "Forced downgrades and re-installs:"
msgstr ""

msgid "Confirm"
msgstr ""

msgid "No actions to perform"
msgstr ""

msgid ""
"Please select at least one action to perform by clicking on the module, and "
"selecting an action on the \"Action\" tab."
msgstr ""

msgid "Cancel"
msgstr ""

msgid "Manage local modules"
msgstr ""

#, php-format
msgid "The following error(s) occurred processing the uploaded file: %s"
msgstr ""

#, php-format
msgid "You should fix the problem or select another file and %s."
msgstr ""

msgid "try again"
msgstr ""

#, php-format
msgid ""
"Module uploaded successfully. You need to enable the module using %s to make "
"it available."
msgstr ""

msgid "local module administration"
msgstr ""

msgid ""
"You can upload a tar gzip file containing a FreePBX module from your local "
"system. If a module with the same name already exists, it will be "
"overwritten."
msgstr ""

msgid "Show only upgradeable"
msgstr ""

msgid "Upload module"
msgstr ""

msgid "Download all"
msgstr ""

msgid "Upgrade all"
msgstr ""

msgid "Reset"
msgstr ""

msgid "Process"
msgstr ""

msgid "Module"
msgstr ""

msgid "Version"
msgstr ""

msgid "Publisher"
msgstr ""

msgid "Broken"
msgstr ""

msgid "name"
msgstr ""

msgid "Not Installed (Locally available)"
msgstr ""

#, php-format
msgid "Not Installed (Available online: %s)"
msgstr ""

#, php-format
msgid "Disabled; Online upgrade available (%s)"
msgstr ""

#, php-format
msgid "Disabled; Newer than online version (%s)"
msgstr ""

msgid "Disabled; up to date"
msgstr ""

msgid "Disabled"
msgstr ""

#, php-format
msgid "Disabled; Pending upgrade to %s"
msgstr ""

#, php-format
msgid "Online upgrade available (%s)"
msgstr ""

#, php-format
msgid "Newer than online version (%s)"
msgstr ""

msgid "Enabled and up to date"
msgstr ""

msgid "Enabled; Not available online"
msgstr ""

msgid "Enabled"
msgstr ""

msgid "Attention"
msgstr ""

msgid "attention"
msgstr ""

msgid "Action"
msgstr ""

msgid "No Action"
msgstr ""

msgid "Install"
msgstr ""

msgid "Download and Install"
msgstr ""

msgid "Enable"
msgstr ""

msgid "Uninstall"
msgstr ""

#, php-format
msgid "Download %s, keep Disabled"
msgstr ""

#, php-format
msgid "Upgrade to %s and Enable"
msgstr ""

#, php-format
msgid "Download and Upgrade to %s"
msgstr ""

#, php-format
msgid "Force Download and Install %s"
msgstr ""

#, php-format
msgid "Force Download and Downgrade to %s"
msgstr ""

msgid "Disable"
msgstr ""

msgid "Description"
msgstr ""

#, php-format
msgid "Publisher: %s"
msgstr ""

#, php-format
msgid "License: %s"
msgstr ""

#, php-format
msgid "Description for version %s"
msgstr ""

msgid "description"
msgstr ""

msgid "No description is available."
msgstr ""

msgid "More info"
msgstr ""

#, php-format
msgid "Get help for %s"
msgstr ""

msgid "Changelog"
msgstr ""

#, php-format
msgid "Change Log for version %s"
msgstr ""

msgid "Debug"
msgstr ""

msgid "All available modules are up-to-date and installed."
msgstr ""

msgid "No modules to display."
msgstr ""

msgid "Untarring.."
msgstr ""

msgid "Done."
msgstr ""

msgid "Upload modules"
msgstr ""

msgid ""
"Choose the repositories that you want to check for new modules. Any updates "
"available for modules you have on your system will be detected even if the "
"repository is not checked. If you are installing a new system, you may want "
"to start with the Basic repository and upload all modules, then go back and "
"review the others."
msgstr ""

msgid ""
" The modules in the Extended repository are less common and may receive "
"lower levels of support. The Unsupported repository has modules that are not "
"supported by the FreePBX team but may receive some level of support by the "
"authors."
msgstr ""

msgid ""
"The Commercial repository is reserved for modules that are available for "
"purchase and commercially supported."
msgstr ""

msgid ""
"Checking for updates will transmit your FreePBX, Distro, Asterisk and PHP "
"version numbers along with a unique but random identifier. This is used to "
"provide proper update information and track version usage to focus "
"development and maintenance efforts. No private information is transmitted."
msgstr ""

msgid "Repositories"
msgstr ""

msgid "Basic"
msgstr ""

msgid "Extended"
msgstr ""

msgid "Unsupported"
msgstr ""

msgid "Commercial"
msgstr ""

msgid "Check Online"
msgstr ""

msgid "FreePBX: Flash Operator Panel"
msgstr ""

msgid "Flash Operator Panel"
msgstr ""

msgid "FreePBX: Call Detail Reports"
msgstr ""

msgid "Call Detail Reports"
msgstr ""

msgid "Call Logs"
msgstr ""

msgid "Compare Calls"
msgstr ""

msgid "Monthly Traffic"
msgstr ""

msgid "Daily load"
msgstr ""

msgid "Please select a \"Destination\""
msgstr ""

msgid ""
"Custom Goto contexts must contain the string \"custom-\".  ie: custom-app,s,1"
msgstr ""

msgid "The secret must be at minimum six characters in length."
msgstr ""

msgid "The secret must contain at least two numbers and two letters."
msgstr ""

msgid "Submit"
msgstr ""

msgid "Please select a valid destination."
msgstr ""

msgid "Online Updates are Disabled"
msgstr ""

msgid ""
"Online updates are disabled on the General Settings page. When disabled, you "
"will not be notified of bug fixes and Security issues without manually "
"checking for updates online. You are advised to enable the update checking. "
"Updates are never downloaded automatically, they are only checked and "
"reported in the notification panel and log if enabled."
msgstr ""

#, php-format
msgid "Cronmanager encountered %s Errors"
msgstr ""

msgid "The following commands failed with the listed error"
msgstr ""

msgid "** MISSING FEATURE CODE **"
msgstr ""

msgid "No Description Provided"
msgstr ""

msgid "Undefined Category"
msgstr ""

msgid "fatal error reading freepbx_settings"
msgstr ""

#, php-format
msgid "Missing or unreadable config file [%s]...cannot continue"
msgstr ""

msgid ""
"Do NOT edit this file as it is auto-generated by FreePBX. All modifications "
"to"
msgstr ""

msgid ""
"this file must be done via the Web GUI. There are alternative files to make"
msgstr ""

msgid "custom modifications, details at:"
msgstr ""

msgid ""
"All settings can be set from the Advanced Settings page accessible in FreePBX"
msgstr ""

msgid "called set_conf_values with a non-array"
msgstr ""

#, php-format
msgid "trying to set keyword [%s] to [%s] on unitialized setting"
msgstr ""

#, php-format
msgid "you can't convert an existing type, keyword [%s]"
msgstr ""

#, php-format
msgid "missing value and/or defaultval required for [%s]"
msgstr ""

msgid "missing options for keyword [%] required if type is select"
msgstr ""

#, php-format
msgid "invalid validation options provided for keyword %s: %s"
msgstr ""

#, php-format
msgid ""
"method define_conf_setting() failed to pass validation for keyword [%s] "
"setting value [%s], error msg if supplied [%s]"
msgstr ""

#, php-format
msgid "fatal error deleting rows from freepbx_settings, sql query: %s"
msgstr ""

msgid "fatal error updating freepbx_settings table"
msgstr ""

msgid "Invalid value supplied to select"
msgstr ""

msgid "Empty value not allowed for this field"
msgstr ""

#, php-format
msgid "Invalid value supplied violates the validation regex: %s"
msgstr ""

#, php-format
msgid "Value [%s] out of range, changed to [%s]"
msgstr ""

#, php-format
msgid "unknown type: [%s]"
msgstr ""

msgid ""
"The following new modules are available for download. Click delete icon on "
"the right to remove this notice."
msgstr ""

#, php-format
msgid "%s New modules are available"
msgstr ""

msgid "There is 1 module available for online upgrade"
msgstr ""

#, php-format
msgid "There are %s modules available for online upgrades"
msgstr ""

#, php-format
msgid "%s (current: %s)"
msgstr ""

#, php-format
msgid "PHP Component %s is required but missing from you PHP installation."
msgstr ""

#, php-format
msgid ""
"PHP Component %s version %s is required but missing from you PHP "
"installation."
msgstr ""

#, php-format
msgid "Module %s is required, but yours is broken. You should reinstall "
msgstr ""

#, php-format
msgid "it and try again."
msgstr ""

#, php-format
msgid "Module %s is required, but yours is disabled."
msgstr ""

#, php-format
msgid "Module %s is required, but yours is disabled because it needs to "
msgstr ""

#, php-format
msgid "be upgraded. Please upgrade %s first, and then try again."
msgstr ""

#, php-format
msgid "Module %s is required, yours is not installed."
msgstr ""

#, php-format
msgid "Module %s is required."
msgstr ""

#, php-format
msgid "File %s must exist."
msgstr ""

#, php-format
msgid "Requires engine %s, you have: %s"
msgstr ""

#, php-format
msgid "Requires one of the following engines: %s; you have: %s"
msgstr ""

#, php-format
msgid "A %s version below %s is required, you have %s"
msgstr ""

#, php-format
msgid "%s version %s or below is required, you have %s"
msgstr ""

#, php-format
msgid "A %s version newer than %s required, you have %s"
msgstr ""

#, php-format
msgid "Your %s version (%s) is incompatible."
msgstr ""

#, php-format
msgid "Only %s version %s is compatible, you have %s"
msgstr ""

#, php-format
msgid "%s version %s or higher is required, you have %s"
msgstr ""

msgid "Module "
msgstr ""

msgid " is already enabled"
msgstr ""

msgid " cannot be enabled"
msgstr ""

msgid "Module not found in repository"
msgstr ""

#, php-format
msgid "Could not remove %s to install new version"
msgstr ""

#, php-format
msgid "Could not untar %s to %s"
msgstr ""

#, php-format
msgid "Could not remove old module %s to install new version"
msgstr ""

#, php-format
msgid "Could not move %s to %s"
msgstr ""

#, php-format
msgid "Error opening %s for writing"
msgstr ""

#, php-format
msgid "Error opening %s for reading"
msgstr ""

#, php-format
msgid "Unable to save %s"
msgstr ""

#, php-format
msgid "File Integrity failed for %s - aborting"
msgstr ""

msgid ""
"Error finding uploaded file - check your PHP and/or web server configuration"
msgstr ""

msgid "File must be in tar or tar+gzip (.tar, .tgz or .tar.gz) format"
msgstr ""

msgid ""
"Filename not in correct format: must be modulename-version.[tar|tar.gz|tgz] "
"(eg. custommodule-0.1.tgz)"
msgstr ""

#, php-format
msgid "Error creating temporary directory: %s"
msgstr ""

msgid "Error untaring uploaded file. Must be a tar or tar+gzip file"
msgstr ""

#, php-format
msgid "Error removing temporary directory: %s"
msgstr ""

msgid "Cannot find module"
msgstr ""

msgid "Could not read module.xml"
msgstr ""

msgid "rawname"
msgstr ""

msgid ""
" is broken and cannot be installed. You should try to download it again."
msgstr ""

msgid "Failed to run installation scripts"
msgstr ""

#, php-format
msgid "Error updating database. Command was: %s; error was: %s "
msgstr ""

msgid "Specified module not found"
msgstr ""

msgid "Module not enabled: cannot disable"
msgstr ""

msgid "Cannot disable: The following modules depend on this one: "
msgstr ""

msgid "Module not installed: cannot uninstall"
msgstr ""

msgid "Error updating database: "
msgstr ""

msgid "Failed to run un-installation scripts"
msgstr ""

#, php-format
msgid "Cannot delete directory %s"
msgstr ""

#, php-format
msgid "Error deleting directory %s (code %d)"
msgstr ""

#, php-format
msgid "You have %s disabled modules"
msgstr ""

msgid "You have a disabled module"
msgstr ""

msgid "The following modules are disabled because they need to be upgraded:"
msgstr ""

msgid "You should go to the module admin page to fix these."
msgstr ""

#, php-format
msgid "You have %s broken modules"
msgstr ""

msgid "You have a broken module"
msgstr ""

msgid "The following modules are disabled because they are broken:"
msgstr ""

msgid "Objects"
msgstr ""

msgid "Object"
msgstr ""

#, php-format
msgid "Used as Destination by %s %s"
msgstr ""

msgid "Trace Back"
msgstr ""

#, php-format
msgid "Forced %s to true"
msgstr ""

#, php-format
msgid ""
"The system detected a problem trying to access external server data and "
"changed internal setting %s (Use wget For Module Admin) to true, see the "
"tooltip in Advanced Settings for more details."
msgstr ""

msgid "Memory Limit Changed"
msgstr ""

#, php-format
msgid ""
"Your memory_limit, %sM, is set too low and has been increased to %sM. You "
"may want to change this in you php.ini config file"
msgstr ""

msgid "Low Memory Limit"
msgstr ""

#, php-format
msgid ""
"Your memory_limit, %sM, is set too low and may cause problems. FreePBX is "
"not able to change this on your system. You should increase this to %sM in "
"you php.ini config file"
msgstr ""

msgid "Magic Quotes GPC"
msgstr ""

msgid ""
"You have magic_quotes_gpc enabled in your php.ini, http or .htaccess file "
"which will cause errors in some modules. FreePBX expects this to be off and "
"runs under that assumption"
msgstr ""

msgid "Potential Security Breach"
msgstr ""

msgid ""
"You are attempting to modify settings from a URL that does not appear to "
"have come from a FreePBX page link or button. This can occur if you manually "
"typed in the URL below. This action has been blocked because the "
"HTTP_REFERER does not match your current SERVER. If you require this access, "
"you can set Check Server Referrer=false in Advanced Settings to disable this "
"security check"
msgstr ""

msgid ""
"The suspect URL is listed below. If this action is intended, you can click "
"this link and your action will be processed. Do not proceed with this if you "
"did not intended to execute this command as it may result in changes to your "
"configuration."
msgstr ""

msgid "SUSPECT LINK:"
msgstr ""

msgid "Internal Options & Configuration"
msgstr ""

msgid "Inbound Call Control"
msgstr ""

msgid "Module Admin"
msgstr ""

msgid "System Administration"
msgstr ""

msgid "Third Party Addon"
msgstr ""

msgid "click to expand/collapse section"
msgstr ""

msgid "category"
msgstr ""

msgid ""
"WARNING: Javascript is disabled in your browser. The FreePBX administration "
"interface requires Javascript to run properly. Please enable javascript or "
"switch to another  browser that supports it."
msgstr ""

msgid "FreePBX&reg;"
msgstr ""

#, php-format
msgid "%s is a registered trademark of %s"
msgstr ""

msgid "FreePBX"
msgstr ""

#, php-format
msgid "%s is licensed under %s"
msgstr ""

#, php-format
msgid "%s %s on %s"
msgstr ""

msgid "Management"
msgstr ""

msgid "Admin"
msgstr ""

msgid "Reports"
msgstr ""

msgid "Panel"
msgstr ""

msgid "Recordings"
msgstr ""

msgid "Help"
msgstr ""

msgid "Logged in: "
msgstr ""

msgid "Logout"
msgstr ""

msgid "Reload Required"
msgstr ""

msgid "Apply Configuration Changes"
msgstr ""

#, php-format
msgid ""
"You have made changes to the configuration that have not yet been applied. "
"When you are finished making all changes, click on %s to put them into "
"effect."
msgstr ""

msgid ""
" error(s) occurred, you should view the notification log on the dashboard or "
"main screen to check for more details."
msgstr ""

msgid "Close"
msgstr ""

msgid "Retry"
msgstr ""

msgid "Error: Did not receive valid response from server"
msgstr ""

msgid ""
"Reloading will apply all configuration changes made in FreePBX to your PBX "
"engine and make them active."
msgstr ""

msgid "Accept"
msgstr ""

msgid "Continue with reload"
msgstr ""

msgid "Cancel reload and go back to editing"
msgstr ""

msgid "Please wait, reloading.."
msgstr ""

msgid "Loading..."
msgstr ""

msgid "Close Browser to Log Out"
msgstr ""

msgid "You must close your browser to logout when using Chrome"
msgstr ""

msgid "Logged out"
msgstr ""

msgid "You have been successfully logged out."
msgstr ""

msgid "Log in"
msgstr ""

#, php-format
msgid "[WARNING]: Menu Item: %s is disabled because asterisk is not running"
msgstr ""

msgid ""
"Restart Asterisk and then refresh the browser in order to try accessing this "
"menu item again."
msgstr ""

msgid "Not found"
msgstr ""

msgid ""
"The section you requested does not exist or you do not have access to it."
msgstr ""

msgid "Unauthorized"
msgstr ""

msgid "You are not authorized to access this page."
msgstr ""

msgid "Warning:"
msgstr ""

msgid "Cannot connect to Asterisk Manager with "
msgstr ""

msgid "Asterisk may not be running."
msgstr ""

msgid "Welcome to FreePBX."
msgstr ""

msgid "Critical"
msgstr ""

msgid "Security"
msgstr ""

msgid "Update"
msgstr ""

msgid "Error"
msgstr ""

msgid "Warning"
msgstr ""

msgid "Notice"
msgstr ""

msgid ""
"If you're new to FreePBX, Welcome. Here are some quick instructions to get "
"you started"
msgstr ""

#, php-format
msgid ""
"There are a large number of Plug-in modules available from the Online "
"Repository. This is\n"
"available by clicking on the <a href='%s'>Tools menu</a> up the top, then\n"
"<a href='%s'>Module Admin</a>, then\n"
"<a href='%s'>Check for updates online</a>.\n"
"Modules are updated and patched often, so if you are having a problem, it's "
"worth checking there to see if there's\n"
"a new version of the module available."
msgstr ""

#, php-format
msgid ""
"If you're having any problems, you can also use the <a href='%s'>Online "
"Support</a> \n"
"module (<b>you need to install this through the <a href='%s'>Module "
"Repository</a> first</b>)\n"
"to talk to other users and the developers in real time. Click on <a href='%"
"s'>Start IRC</a>,\n"
"when the module is installed, to start a Java IRC client."
msgstr ""

#, php-format
msgid ""
"There is also a community based <a href='%s' target='_new'>FreePBX Web "
"Forum</a> where you can post\n"
"questions and search for answers for any problems you may be having."
msgstr ""

msgid "We hope you enjoy using FreePBX!"
msgstr ""

msgid "Core"
msgstr ""

msgid "Extensions"
msgstr ""

msgid "Users"
msgstr ""

msgid "Devices"
msgstr ""

msgid "Inbound Routes"
msgstr ""

msgid "Zap Channel DIDs"
msgstr ""

msgid "Outbound Routes"
msgstr ""

msgid "Trunks"
msgstr ""

msgid "General Settings"
msgstr ""

msgid "Advanced Settings"
msgstr ""

msgid "Administrators"
msgstr ""

msgid "FreePBX Support"
msgstr ""

msgid "FreePBX Framework"
msgstr ""

msgid ""
"This module provides a facility to install bug fixes to the framework code "
"that is not otherwise housed in a module"
msgstr ""

msgid "Display Friendly Name"
msgstr ""

msgid "Advanced Settings Details"
msgstr ""

msgid ""
"Normally the friendly names will be displayed on this page and the internal "
"freepbx_conf configuration names are shown in the tooltip. If you prefer to "
"view the configuration variables, and the friendly name in the tooltip, set "
"this to false.."
msgstr ""

msgid "Display Hidden Settings"
msgstr ""

msgid ""
"This will display settings that are normally hidden by the system. These "
"settings are often internally used settings that are not of interest to most "
"users."
msgstr ""

msgid "Display Readonly Settings"
msgstr ""

msgid ""
"This will display settings that are readonly. These settings are often "
"internally used settings that are not of interest to most users. Since they "
"are readonly they can only be viewed."
msgstr ""

msgid "Override Readonly Settings"
msgstr ""

msgid ""
"Setting this to true will allow you to override un-hidden readonly setting "
"to change them. Settings that are readonly may be extremely volatile and "
"have a high chance of breaking your system if you change them. Take extreme "
"caution when electing to make such changes."
msgstr ""

msgid "Asterisk Manager Host"
msgstr ""

msgid "Asterisk Manager"
msgstr ""

msgid "Hostname for the Asterisk Manager"
msgstr ""

msgid "Asterisk Manager Password"
msgstr ""

msgid ""
"Password for accessing the Asterisk Manager Interface (AMI), you must change "
"this in manager.conf if changed here."
msgstr ""

msgid "Asterisk Manager Port"
msgstr ""

msgid "Port for the Asterisk Manager"
msgstr ""

msgid "Asterisk Manager Proxy Port"
msgstr ""

msgid "Optional port for an Asterisk Manager Proxy"
msgstr ""

msgid "Asterisk Manager User"
msgstr ""

msgid ""
"Username for accessing the Asterisk Manager Interface (AMI), you must change "
"this in manager.conf if changed here."
msgstr ""

msgid "Always Download Web Assets"
msgstr ""

msgid "Developer and Customization"
msgstr ""

msgid ""
"FreePBX appends versioning tags on the CSS and javascript files and some of "
"the main logo images. The versioning will help force browsers to load new "
"versions of the files when module versions are upgraded. Setting this value "
"to true will try to force these to be loaded to the browser every page load "
"by appending an additional timestamp in the version information. This is "
"useful during development and debugging where changes are being made to "
"javascript and CSS files."
msgstr ""

msgid "AMPLOCALBIN Dir for retrieve_conf"
msgstr ""

msgid ""
"If this directory is defined, retrieve_conf will check for a file called "
"<i>retrieve_conf_post_custom</i> and if that file exists, it will be "
"included after other processing thus having full access to the current "
"environment for additional customization."
msgstr ""

msgid "Debug File"
msgstr ""

msgid ""
"Full path and name of FreePBX debug file. Used by the dbug() function by "
"developers."
msgstr ""

msgid "Developer Mode"
msgstr ""

msgid ""
"This enables several debug features geared towards developers, including "
"some page load timing information, some debug information in Module Admin, "
"use of original CSS files and other future capabilities will be enabled."
msgstr ""

msgid "Disable FreePBX dbug Logging"
msgstr ""

msgid ""
"Set to true to stop all dbug() calls from writing to the Debug File "
"(FPBXDBUGFILE)"
msgstr ""

msgid "Disable Mainstyle CSS Compression"
msgstr ""

msgid ""
"Stops the automatic generation of a stripped CSS file that replaces the "
"primary sheet, usually mainstyle.css."
msgstr ""

msgid "Disable Module Admin Caching"
msgstr ""

msgid ""
"Module Admin caches a copy of the online XML document that describes what is "
"available on the server. Subsequent online update checks will use the cached "
"information if it is less than 5 minutes old. To bypass the cache and force "
"it to go to the server each time, set this to True. This should normally be "
"false but can be helpful during testing."
msgstr ""

msgid "Leave Reload Bar Up"
msgstr ""

msgid "Forces the "
msgstr ""

msgid " reload bar to always be present even when not necessary."
msgstr ""

msgid "POST_RELOAD Debug Mode"
msgstr ""

msgid "Display debug output for script used if POST_RELOAD is used."
msgstr ""

msgid "POST_RELOAD Script"
msgstr ""

msgid ""
"Automatically execute a script after applying changes in the AMP admin. Set "
"POST_RELOAD to the script you wish to execute after applying changes. If "
"POST_RELOAD_DEBUG=true, you will see the output of the script in the web "
"page."
msgstr ""

msgid "PRE_RELOAD Script"
msgstr ""

msgid ""
"Optional script to run just prior to doing an extension reload to Asterisk "
"through the manager after pressing Apply Configuration Changes in the GUI."
msgstr ""

msgid "Provide Verbose Tracebacks"
msgstr ""

msgid ""
"Provides a very verbose traceback when die_freepbx() is called including "
"extensive object details if present in the traceback."
msgstr ""

msgid "Use Packaged Javascript Library "
msgstr ""

msgid ""
"FreePBX packages several javascript libraries and components into a "
"compressed file called libfreepbx.javascript.js. By default this will be "
"loaded instead of the individual uncompressed libraries. Setting this to "
"false will force FreePBX to load all the libraries as individual "
"uncompressed files. This is useful during development and debugging."
msgstr ""

msgid "Post Call Recording Script"
msgstr ""

msgid "Show all Device Setting on Add"
msgstr ""

msgid "Device Settings"
msgstr ""

msgid ""
"When adding a new extension/device, setting this to true will show most "
"available device settings that are displayed when you edit the same "
"extension/device. Otherwise, just a few basic settings are displayed."
msgstr ""

msgid "Require Strong Secrets"
msgstr ""

msgid ""
"Requires a strong secret on SIP and IAX devices requiring at least two "
"numeric and non-numeric characters and 6 or more characters. This can be "
"disabled if using devices that can not meet these needs, or you prefer to "
"put other constraints including more rigid constraints that this rule "
"actually considers weak when it may not be."
msgstr ""

msgid "SIP canrenivite (directmedia)"
msgstr ""

msgid ""
"Default setting for SIP canreinvite (same as directmedia). See Asterisk "
"documentation for details."
msgstr ""

msgid "SIP trustrpid"
msgstr ""

msgid ""
"Default setting for SIP trustrpid. See Asterisk documentation for details."
msgstr ""

msgid "SIP sendrpid"
msgstr ""

msgid ""
"Default setting for SIP sendrpid. A value of 'yes' is equivalent to 'rpid' "
"and will send the 'Remote-Pary-ID' header. A value of 'pai' is only valid "
"starting with Asterisk 1.8 and will send the 'P-Asserted-Identity' header. "
"See Asterisk documentation for details."
msgstr ""

msgid "SIP nat"
msgstr ""

msgid ""
"Default setting for SIP nat. A 'yes' will attempt to handle nat, also works "
"for local (uses the network ports and address instead of the reported "
"ports), 'no' follows the protocol, 'never' tries to block it, no RFC3581, "
"'route' ignores the rport information. See Asterisk documentation for "
"details."
msgstr ""

msgid "SIP encryption"
msgstr ""

msgid ""
"Default setting for SIP encryption. Whether to offer SRTP encrypted media "
"(and only SRTP encrypted media) on outgoing calls to a peer. Calls will fail "
"with HANGUPCAUSE=58 if the peer does not support SRTP. See Asterisk "
"documentation for details."
msgstr ""

msgid "SIP qualifyfreq"
msgstr ""

msgid ""
"Default setting for SIP qualifyfreq. Only valid for Asterisk 1.6 and above. "
"Frequency that 'qualify' OPTIONS messages will be sent to the device. Can "
"help to keep NAT holes open but not dependable for remote client firewalls. "
"See Asterisk documentation for details."
msgstr ""

msgid "SIP and IAX qualify"
msgstr ""

msgid ""
"Default setting for SIP and IAX qualify. Whether to send periodic OPTIONS "
"messages (for SIP) or otherwise monitor the channel, and at what point to "
"consider the channel unavailable. A value of 'yes' is equivalent to 2000, "
"time in msec. Can help to keep NAT holes open with SIP but not dependable "
"for remote client firewalls. See Asterisk documentation for details."
msgstr ""

msgid "SIP and IAX allow"
msgstr ""

msgid ""
"Default setting for SIP and IAX allow (for codecs). Codecs to allow in "
"addition to those set in general settings unless explicitly 'disallowed' for "
"the device. Values van be separated with '&' e.g. 'ulaw&g729&g729' where the "
"preference order is preserved. See Asterisk documentation for details."
msgstr ""

msgid "SIP and IAX disallow"
msgstr ""

msgid ""
"Default setting for SIP and IAX disallow (for codecs). Codecs to disallow, "
"can help to reset from the general settings by setting a value of 'all' and "
"then specifically including allowed codecs with the 'allow' directive. "
"Values van be separated with '&' e.g. 'g729&g722'. See Asterisk "
"documentation for details."
msgstr ""

msgid "SIP & DAHDI callgroup"
msgstr ""

msgid ""
"Default setting for SIP, DAHDI (and Zap) callgroup. Callgroup(s) that the "
"device is part of, can be one or more callgroups, e.g. '1,3-5' would be in "
"groups 1,3,4,5. See Asterisk documentation for details."
msgstr ""

msgid "SIP & DAHDI pickupgroup"
msgstr ""

msgid ""
"Default setting for SIP, DAHDI (and Zap) pickupgroup. Pickupgroups(s) that "
"the device can pickup calls from, can be one or more groups, e.g. '1,3-5' "
"would be in groups 1,3,4,5. Device does not have to be in a group to be able "
"to pickup calls from that group. See Asterisk documentation for details."
msgstr ""

msgid "Block CNAM on External Trunks"
msgstr ""

msgid "Dialplan and Operational"
msgstr ""

msgid ""
"Some carriers will reject a call if a CallerID Name (CNAM) is presented. "
"This occurs in several areas when configuring CID on the PBX using the "
"format of "
msgstr ""

msgid ""
" <CNUM>. To remove the CNAM part of CID on all external trunks, set this "
"value to true. This WILL NOT remove CNAM when a trunk is called from an "
"Intra-Company route. This can be done on each individual trunk in addition "
"to globally if there are trunks where it is desirable to keep CNAM "
"information, though most carriers ignore CNAM."
msgstr ""

msgid "Call Forward Ringtimer Default"
msgstr ""

msgid ""
"This is the default time in seconds to try and connect a call that has been "
"call forwarded by the server side CF, CFU and CFB options. (If your phones "
"use client side CF such as SIP redirects, this will not have any affect) If "
"set to the default of 0, it will use the standard ring timer. If set to -1 "
"it will ring the forwarded number with no limit which is consistent with the "
"behavior of some existing PBX systems. If set to any other value, it will "
"ring for that duration before diverting the call to the users voicemail if "
"they have one. This can be overridden for each extension."
msgstr ""

msgid "Convert ZAP Settings to DAHDi"
msgstr ""

msgid ""
"If set to true, FreePBX will check if you have chan_dahdi installed. If so, "
"it will automatically use all your ZAP configuration settings (devices and "
"trunks) and silently convert them, under the covers, to DAHDI so no changes "
"are needed. The GUI will continue to refer to these as ZAP but it will use "
"the proper DAHDI channels. This will also keep Zap Channel DIDs working."
msgstr ""

msgid "CW Enabled by Default"
msgstr ""

msgid ""
"Enable call waiting by default when an extension is created (Default is "
"yes). Set to <b>no</b> to if you do not want phones to be commissioned with "
"call waiting already enabled. The user would then be required to dial the CW "
"feature code (*70 default) to enable their phone. Most installations should "
"leave this alone. It allows multi-line phones to receive multiple calls on "
"their line appearances."
msgstr ""

msgid "Disable -custom Context Includes"
msgstr ""

msgid ""
"Normally FreePBX auto-generates a custom context that may be usable for "
"adding custom dialplan to modify the normal behavior of FreePBX. It takes a "
"good understanding of how Asterisk processes these includes to use this and "
"in many of the cases, there is no useful application. All includes will "
"result in a WARNING in the Asterisk log if there is no context found to "
"include though it results in no errors. If you know that you want the "
"includes, you can set this to true. If you comment it out FreePBX will "
"revert to legacy behavior and include the contexts."
msgstr ""

msgid "Dynamically Generate Hints"
msgstr ""

msgid ""
"If true, Core will not statically generate hints, but instead make a call to "
"the AMPBIN php script, and generate_hints.php through an Asterisk #exec "
"call. This requires asterisk.conf to be configured with "
"<b>execincludes=yes<b> set in the [options] section."
msgstr ""

msgid "Enable Custom Device States"
msgstr ""

msgid ""
"If this is set, it assumes that you are running Asterisk 1.4 or higher and "
"want to take advantage of the func_devstate.c backport available from "
"Asterisk 1.6. This allows custom hints to be created to support BLF for "
"server side feature codes such as daynight, followme, etc"
msgstr ""

msgid "Extension Concurrency Limit"
msgstr ""

msgid ""
"Default maximum number of outbound simultaneous calls that an extension can "
"make. This is also very useful as a Security Protection against a system "
"that has been compromised. It will limit the number of simultaneous calls "
"that can be made on the compromised extension. This default is used when an "
"extension is created. A default of 0 means no limit."
msgstr ""

msgid "Feature Codes Beep Only"
msgstr ""

msgid ""
"When set to true, a beep is played instead of confirmation message when "
"activating/de-activating: CallForward, CallWaiting, DayNight, DoNotDisturb "
"and FindMeFollow."
msgstr ""

msgid "Force All Internal Auto Answer"
msgstr ""

msgid ""
"Force all extensions to operate in the Internal Auto Answer mode regardless "
"of their individual settings. See 'Internal Auto Answer Default' for more "
"information."
msgstr ""

msgid "Generate Diversion Headers"
msgstr ""

msgid ""
"If this value is set to true, then calls going out your outbound routes that "
"originate from outside your PBX and were subsequently forwarded through a "
"call forward, ring group, follow-me or other means, will have a SIP "
"diversion header added to the call with the original incoming DID assuming "
"there is a DID available. This is useful with some carriers that may require "
"this under certain circumstances."
msgstr ""

msgid "Internal Auto Answer Default"
msgstr ""

msgid ""
"Default setting for new extensions. When set to Intercom, calls to new "
"extensions/users from other internal users act as if they were intercom "
"calls meaning they will be auto-answered if the endpoint supports this "
"feature and the system is configured to operate in this mode. All the normal "
"white list and black list settings will be honored if they are set. External "
"calls will still ring as normal, as will certain other circumstances such as "
"blind transfers and when a Follow Me is configured and enabled. If Disabled, "
"the phone rings as a normal phone."
msgstr ""

msgid "NoOp Traces in Dialplan"
msgstr ""

msgid ""
"Some modules will generate lots of NoOp() commands proceeded by a [TRACE]"
"(trace_level) that can be used during development or while trying to trace "
"call flows. These NoOp() commands serve no other purpose so if you do not "
"want to see excessive NoOp()s in your dialplan you can set this to 0. The "
"higher the number the more detailed level of trace NoOp()s will be generated"
msgstr ""

msgid "Occupied Lines CW Busy"
msgstr ""

msgid ""
"For extensions that have CW enabled, report unanswered CW calls as <b>busy</"
"b> (resulting in busy voicemail greeting). If set to no, unanswered CW calls "
"simply report as <b>no-answer</b>."
msgstr ""

msgid "Polling Interval for Stopping Asterisk"
msgstr ""

msgid ""
"When Asterisk is stopped or restarted with the 'amportal stop/restart' "
"commands, it does a graceful stop waiting for active channels to hangup. "
"This sets the polling interval to check if Asterisk is shutdown and update "
"the countdown timer."
msgstr ""

msgid "Use bad-number Context"
msgstr ""

msgid ""
"Generate the bad-number context which traps any bogus number or feature code "
"and plays a message to the effect. If you use the Early Dial feature on some "
"Grandstream phones, you will want to set this to false."
msgstr ""

msgid "Use Google DNS for Enum"
msgstr ""

msgid ""
"Setting this flag will generate the required global variable so that "
"enumlookup.agi will use Google DNS 8.8.8.8 when performing an ENUM lookup. "
"Not all DNS deals with NAPTR record, but Google does. There is a drawback to "
"this as Google tracks every lookup. If you are not comfortable with this, do "
"not enable this setting. Please read Google FAQ about this: <b>http://code."
"google.com/speed/public-dns/faq.html#privacy</b>."
msgstr ""

msgid "Waiting Period to Stop Asterisk"
msgstr ""

msgid ""
"When Asterisk is stopped or restarted with the 'amportal stop/restart' "
"commands, it does a graceful stop waiting for active channels to hangup. "
"This sets the maximum time in seconds to wait prior to force stopping "
"Asterisk"
msgstr ""

msgid "Use Automixmon for One-Touch Recording"
msgstr ""

msgid ""
"Starting with Asterisk 1.6, one-touch-recording can be toggled on and off "
"during a call if the dial options had 'x' and/or 'X' options set. When this "
"is set to true, the 'In-Call Asterisk Toggle Call Recording' will use the "
"asterisk 'automixmon' option instead of the 'automon' option to set this. "
"Only one or the other can be set from the GUI. You need to set the proper "
"options of 'x' and/or 'X' when using this, or 'w' and/or 'W' if using the "
"older 'automon' version. Setting this to true will have no effect on systems "
"running Asterisk 1.4 or earlier."
msgstr ""

msgid "Asterisk AGI Dir"
msgstr ""

msgid "Directory Layout"
msgstr ""

msgid "This is the default directory for Asterisks agi files."
msgstr ""

msgid "Asterisk bin Dir"
msgstr ""

msgid "This is the default directory for Asterisks lib files."
msgstr ""

msgid "Asterisk etc Dir"
msgstr ""

msgid "This is the default directory for Asterisks configuration files."
msgstr ""

msgid "Asterisk Log Dir"
msgstr ""

msgid "This is the default directory for Asterisks log files."
msgstr ""

msgid "Asterisk Modules Dir"
msgstr ""

msgid "This is the default directory for Asterisks modules."
msgstr ""

msgid "Asterisk Run Dir"
msgstr ""

msgid "This is the default directory for Asterisks run files."
msgstr ""

msgid "Asterisk Spool Dir"
msgstr ""

msgid "This is the default directory for Asterisks spool directory."
msgstr ""

msgid "CGI Dir"
msgstr ""

msgid "The path to Apache cgi-bin dir (leave off trailing slash)."
msgstr ""

msgid "FreePBX bin Dir"
msgstr ""

msgid "Location of the FreePBX command line scripts."
msgstr ""

msgid "FreePBX sbin Dir"
msgstr ""

msgid "Where (root) command line scripts are located."
msgstr ""

msgid "FreePBX Web Root Dir"
msgstr ""

msgid "The path to Apache webroot (leave off trailing slash)."
msgstr ""

msgid "MoH Subdirectory"
msgstr ""

msgid ""
"This is the subdirectory for the MoH files/directories which is located in "
"ASTVARLIBDIR. Older installation may be using mohmp3 which was the old "
"Asterisk default and should be set to that value if the music files are "
"located there relative to the ASTVARLIBDIR."
msgstr ""

msgid "Override Call Recording Location"
msgstr ""

msgid ""
"Override the default location where asterisk will store call recordings. Be "
"sure to set proper permissions on the directory for the asterisk user."
msgstr ""

msgid "Disable FOP"
msgstr ""

msgid ""
"Set to true to disable FOP in interface and retrieve_conf.  Useful for "
"sqlite3 or if you do not want FOP."
msgstr ""

msgid "FOP Password"
msgstr ""

msgid ""
"Password for performing transfers and hangups in the Flash Operator Panel "
"(FOP)."
msgstr ""

msgid "FOP Sort Mode"
msgstr ""

msgid ""
"How FOP sort extensions. By Last Name [lastname] or by Extension [extension]."
msgstr ""

msgid "FOP Web Root Dir"
msgstr ""

msgid "Path to the Flash Operator Panel webroot (leave off trailing slash)."
msgstr ""

msgid "Start FOP with amportal"
msgstr ""

msgid ""
"Set to true if you want FOP started by freepbx_engine (amportal_start), "
"false otherwise."
msgstr ""

msgid "Abort Config Gen on Bad Dest"
msgstr ""

msgid "GUI Behavior"
msgstr ""

msgid ""
"Setting either of these to true will result in retrieve_conf aborting during "
"a reload if an extension conflict is detected or a destination is detected. "
"It is usually better to allow the reload to go through and then correct the "
"problem but these can be set if a more strict behavior is desired."
msgstr ""

msgid "Abort Config Gen on Exten Conflict"
msgstr ""

msgid "Check Server Referrer"
msgstr ""

msgid ""
"When set to the default value of true, all requests into FreePBX that might "
"possibly add/edit/delete settings will be validated to assure the request is "
"coming from the server. This will protect the system from CSRF (cross site "
"request forgery) attacks. It will have the effect of preventing legitimately "
"entering URLs that could modify settings which can be allowed by changing "
"this field to false."
msgstr ""

msgid "Include Server Name in Browser"
msgstr ""

msgid "Precede browser title with the server name."
msgstr ""

msgid "Report Unknown Dest as Error"
msgstr ""

msgid ""
"If false, then the Destination Registry will not report unknown destinations "
"as errors. This should be left to the default true and custom destinations "
"should be moved into the new custom apps registry."
msgstr ""

msgid "Require Confirm with Apply Changes"
msgstr ""

msgid "When set to false, will bypass the confirm on Reload Box."
msgstr ""

msgid "Show Categories in Nav Menu"
msgstr ""

msgid ""
"Controls if the menu items in the admin interface are sorted by category "
"(true) or sorted alphabetically with no categories shown (false). Defaults = "
"true"
msgstr ""

msgid "Use wget For Module Admin"
msgstr ""

msgid ""
"Module Admin normally tries to get its online information through direct "
"file open type calls to URLs that go back to the freepbx.org server. If it "
"fails, typically because of content filters in firewalls that do not like "
"the way PHP formats the requests, the code will fall back and try a wget to "
"pull the information. This will often solve the problem. However, in such "
"environment there can be a significant timeout before the failed file open "
"calls to the URLs return and there are often 2-3 of these that occur. "
"Setting this value will force FreePBX to avoid the attempt to open the URL "
"and go straight to the wget calls."
msgstr ""

msgid "Asterisk Function CONNECTEDLINE"
msgstr ""

msgid "Internal Use"
msgstr ""

msgid ""
"Set to the function name if the function is present in this Asterisk install"
msgstr ""

msgid "Asterisk Function DEVICE_STATE"
msgstr ""

msgid "Asterisk Function EXTENSION_STATE"
msgstr ""

msgid "Asterisk Function MASTER_CHANNEL"
msgstr ""

msgid "Asterisk Function SHARED"
msgstr ""

msgid "Asterisk Version"
msgstr ""

msgid ""
"Asterisk Version used during last 'Apply Configuration Changes' when "
"retrieve_conf is run"
msgstr ""

msgid "Auto Generated Copy of Main CSS"
msgstr ""

msgid "internal use"
msgstr ""

msgid "Last Mod Time of Main CSS"
msgstr ""

msgid "Remote CDR DB Host"
msgstr ""

msgid "Remote CDR Database"
msgstr ""

msgid ""
"DO NOT set this unless you know what you are doing. Only used if you do not "
"use the default values provided by FreePBX.<br>Hostname of db server if not "
"the same as AMPDBHOST."
msgstr ""

msgid "Remote CDR DB Name"
msgstr ""

msgid ""
"DO NOT set this unless you know what you are doing. Only used if you do not "
"use the default values provided by FreePBX.<br>Name of database used for cdr "
"records."
msgstr ""

msgid "Remote CDR DB Password"
msgstr ""

msgid ""
"DO NOT set this unless you know what you are doing. Only used if you do not "
"use the default values provided by FreePBX.<br>Password for connecting to db "
"if its not the same as AMPDBPASS."
msgstr ""

msgid ""
"DO NOT set this unless you know what you are doing. Only used if you do not "
"use the default values provided by FreePBX.<br>Port number for db host."
msgstr ""

msgid "Remote CDR DB Table"
msgstr ""

msgid ""
"DO NOT set this unless you know what you are doing. Only used if you do not "
"use the default values provided by FreePBX. Name of the table in the db "
"where the cdr is stored. cdr is default."
msgstr ""

msgid "Remote CDR DB Type"
msgstr ""

msgid ""
"DO NOT set this unless you know what you are doing. Only used if you do not "
"use the default values provided by FreePBX. Defaults to your configured "
"AMDBENGINE."
msgstr ""

msgid "Remote CDR DB User"
msgstr ""

msgid ""
"DO NOT set this unless you know what you are doing. Only used if you do not "
"use the default values provided by FreePBX. Username to connect to db with "
"if it is not the same as AMPDBUSER."
msgstr ""

msgid "Legacy Right Logo"
msgstr ""

msgid "Styling and Logos"
msgstr ""

msgid ""
"Legacy setting, use BRAND_IMAGE_FREEPBX_RIGHT in the future. If set, this "
"will override BRAND_IMAGE_FREEPBX_RIGHT. The setting is the name of the "
"image file and is always assumed to be present in the admin/images "
"directory. Overrides the standard logo that is to be displayed at the TOP "
"RIGHT of the admin screen. This enables you to customize the look of the "
"administration screen. NOTE: images need to be saved in the ..../admin/"
"images directory of your AMP install. This image should be 55px in height."
msgstr ""

msgid "Hide Nav Background"
msgstr ""

msgid "Hide the configured left navigation bar background."
msgstr ""

msgid "Image: shadow-side-background.png"
msgstr ""

msgid "Styling image."
msgstr ""

msgid "Image: Right Upper"
msgstr ""

msgid ""
"Right upper logo. Use this setting instead of AMPADMINLOGO. Path is relative "
"to admin."
msgstr ""

msgid "Image: Left Upper"
msgstr ""

msgid "Left upper logo.  Path is relative to admin."
msgstr ""

msgid "Image: Footer"
msgstr ""

msgid "Logo in footer.  Path is relative to admin."
msgstr ""

msgid "Image: Reload Screen"
msgstr ""

msgid ""
"Image used during a reload, default is animated GIF eating the * "
"(asterisk).  Path is relative to admin."
msgstr ""

msgid "Alt for Left Logo"
msgstr ""

msgid ""
"alt attribute to use in place of image and title hover value. Defaults to "
"FreePBX"
msgstr ""

msgid "Alt for Right Logo"
msgstr ""

msgid "Alt for Footer Logo"
msgstr ""

msgid "Link for Left Logo"
msgstr ""

msgid ""
"link to follow when clicking on logo, defaults to http://www.freepbx.org"
msgstr ""

msgid "Link for Right Logo"
msgstr ""

msgid "Link for Footer Logo"
msgstr ""

msgid "Hide Right Logo"
msgstr ""

msgid "Setting to true will hide the upper right logo."
msgstr ""

msgid "Hide Left FreePBX Version"
msgstr ""

msgid ""
"Setting to true will hide the FreePBX version information below the left "
"upper header."
msgstr ""

msgid "Hide Header Menus"
msgstr ""

msgid ""
"Setting to true will hide the complete horizontal menu bar in the header."
msgstr ""

msgid "Primary CSS Stylesheet"
msgstr ""

msgid ""
"Set this to replace the default mainstyle.css style sheet with your own, "
"relative to admin."
msgstr ""

msgid "Optional Additional CSS Stylesheet"
msgstr ""

msgid ""
"Optional custom CSS style sheet included after the primary one and any "
"module specific ones are loaded, relative to admin."
msgstr ""

msgid "View: freepbx_admin.php"
msgstr ""

msgid ""
"freepbx_admin.php view. This should never be changed except for very "
"advanced layout changes."
msgstr ""

msgid "View: freepbx.php"
msgstr ""

msgid ""
"freepbx.php view. This should never be changed except for very advanced "
"layout changes."
msgstr ""

msgid "View: freepbx_reload.php"
msgstr ""

msgid ""
"freepbx_reload.php view. This should never be changed except for very "
"advanced layout changes."
msgstr ""

msgid "View: freepbx_reloadbar.php"
msgstr ""

msgid ""
"freepbx_reloadbar.php view. This should never be changed except for very "
"advanced layout changes."
msgstr ""

msgid "View: welcome.php"
msgstr ""

msgid ""
"welcome.php view. This should never be changed except for very advanced "
"layout changes."
msgstr ""

msgid "View: welcome_nomanager.php"
msgstr ""

msgid ""
"welcome_nomanager.php view. This should never be changed except for very "
"advanced layout changes."
msgstr ""

msgid "View: menuitem_disabled.php"
msgstr ""

msgid ""
"menuitem_disabled.php view. This should never be changed except for very "
"advanced layout changes."
msgstr ""

msgid "View: noaccess.php"
msgstr ""

msgid ""
"noaccess.php view. This should never be changed except for very advanced "
"layout changes."
msgstr ""

msgid "View: unauthorized.php"
msgstr ""

msgid ""
"unauthorized.php view. This should never be changed except for very advanced "
"layout changes."
msgstr ""

msgid "View: bad_refferer.php"
msgstr ""

msgid ""
"bad_refferer.php view. This should never be changed except for very advanced "
"layout changes."
msgstr ""

msgid "View: loggedout.php"
msgstr ""

msgid ""
"loggedout.php view. This should never be changed except for very advanced "
"layout changes."
msgstr ""

msgid "View: panel.php"
msgstr ""

msgid ""
"panel.php view. This should never be changed except for very advanced layout "
"changes."
msgstr ""

msgid "View: reports.php"
msgstr ""

msgid ""
"reports.php view. This should never be changed except for very advanced "
"layout changes."
msgstr ""

msgid "FreePBX Log Routing"
msgstr ""

msgid "System Setup"
msgstr ""

msgid ""
"Determine where to send log information if the log is enabled ('Disable "
"FreePBX Log' (AMPDISABLELOG) false. There are two places to route the log "
"messages. 'FILE' will send all log messages to the defined 'FreePBX Log "
"File' (FPBX_LOG_FILE). All the other settings will route the log messages to "
"your System Logging subsystem (syslog) using the specified log level. Syslog "
"can be configured to route different levels to different locations. See "
"'syslog' documentation (man syslog) on your system for more details."
msgstr ""

msgid "Disable FreePBX Log"
msgstr ""

msgid "Whether or not to invoke the FreePBX log facility."
msgstr ""

msgid "Log Verbose Messages"
msgstr ""

msgid ""
"FreePBX has many verbose and useful messages displayed to users during "
"module installation, system installations, loading configurations and other "
"places. In order to accumulate these messages in the log files as well as "
"the on screen display, set this to true."
msgstr ""

msgid "Send Dashboard Notifications to Log"
msgstr ""

msgid ""
"When enabled all notification updates to the Dashboard notification panel "
"will also be logged into the specified log file when enabled."
msgstr ""

msgid "FreePBX Log File"
msgstr ""

msgid ""
"Full path and name of the FreePBX Log File used in conjunction with the "
"Syslog Level (AMPSYSLOGLEVEL) being set to FILE, not used otherwise. Initial "
"installs may have some early logging sent to /tmp/freepbx_pre_install.log "
"when it is first bootstrapping the installer."
msgstr ""

msgid "PHP Error Log Output"
msgstr ""

msgid ""
"Where to send PHP errors, warnings and notices by the FreePBX PHP error "
"handler. Set to 'dbug', they will go to the Debug File regardless of whether "
"dbug Loggin is disalbed or not. Set to 'freepbxlog' will send them to the "
"FreePBX Log. Set to 'off' and they will be ignored."
msgstr ""

msgid "User & Devices Mode"
msgstr ""

msgid ""
"Sets the extension behavior in FreePBX.  If set to <b>extensions</b>, "
"Devices and Users are administered together as a unified Extension, and "
"appear on a single page. If set to <b>deviceanduser</b>, Devices and Users "
"will be administered separately. Devices (e.g. each individual line on a SIP "
"phone) and Users (e.g. <b>101</b>) will be configured independent of each "
"other, allowing association of one User to many Devices, or allowing Users "
"to login and logout of Devices."
msgstr ""

msgid "Authorization Type"
msgstr ""

msgid ""
"Authentication type to use for web admin. If type set to <b>database</b>, "
"the primary AMP admin credentials will be the AMPDBUSER/AMPDBPASS above. "
"When using database you can create users that are restricted to only certain "
"module pages. When set to none, you should make sure you have provided "
"security at the apache level. When set to webserver, FreePBX will expect "
"authentication to happen at the apache level, but will take the user "
"credentials and apply any restrictions as if it were in database mode."
msgstr ""

msgid "Allow Login With DB Credentials"
msgstr ""

msgid ""
"When Set to True, admin access to the FreePBX GUI will be allowed using the "
"FreePBX configured AMPDBUSER and AMPDBPASS credentials. This only applies "
"when Authorization Type is 'database' mode."
msgstr ""

msgid "User Portal Admin Username"
msgstr ""

msgid ""
"This is the default admin name used to allow an administrator to login to "
"ARI bypassing all security. Change this to whatever you want, do not forget "
"to change the User Portal Admin Password as well. Default = not set"
msgstr ""

msgid "User Portal Admin Password"
msgstr ""

msgid ""
"This is the default admin password to allow an administrator to login to ARI "
"bypassing all security. Change this to a secure password. Default = not set"
msgstr ""

msgid "Asterisk VMU Mask"
msgstr ""

msgid ""
"Defaults to 077 allowing only the asterisk user to have any permission on VM "
"files. If set to something like 007, it would allow the group to have "
"permissions. This can be used if setting apache to a different user then "
"asterisk, so that the apache user (and thus ARI) can have access to read/"
"write/delete the voicemail files. If changed, some of the voicemail "
"directory structures may have to be manually changed."
msgstr ""

msgid "Force Asterisk Version"
msgstr ""

msgid ""
"Normally FreePBX gets the current Asterisk version directly form Asterisk. "
"This is required to generate proper dialplan for a given version. When using "
"some custom Asterisk builds, the version may not be properly parsed and "
"imporoper dialplan generated. Setting this to an equivalent Asterisk version "
"will override what is read from Asterisk. This SHOULD be left blank unless "
"you know what you are doing."
msgstr ""

msgid "FreePBX Web Address"
msgstr ""

msgid ""
"This is the address of your Web Server. It is mostly obsolete and derived "
"when not supplied and will be phased out, but there are still some areas "
"expecting a variable to be set and if you are using it this will migrate "
"your value."
msgstr ""

msgid "System Asterisk Group"
msgstr ""

msgid ""
"The user group Asterisk should be running as, used by freepbx_engine. Most "
"systems should not change this."
msgstr ""

msgid "System Asterisk User"
msgstr ""

msgid ""
"The user Asterisk should be running as, used by freepbx_engine. Most systems "
"should not change this."
msgstr ""

msgid "System Device Group"
msgstr ""

msgid ""
"The user group that various device directories should be set to, used by "
"freepbx_engine. Examples include /dev/zap, /dev/dahdi, /dev/misdn, /dev/"
"mISDN and /dev/dsp. Most systems should not change this."
msgstr ""

msgid "System Device User"
msgstr ""

msgid ""
"The user that various device directories should be set to, used by "
"freepbx_engine. Examples include /dev/zap, /dev/dahdi, /dev/misdn, /dev/"
"mISDN and /dev/dsp. Most systems should not change this."
msgstr ""

msgid "System Web Group"
msgstr ""

msgid ""
"The user group your httpd should be running as, used by freepbx_engine. Most "
"systems should not change this."
msgstr ""

msgid "System Web User"
msgstr ""

msgid ""
"The user your httpd should be running as, used by freepbx_engine. Most "
"systems should not change this."
msgstr ""

msgid "Telephony Engine"
msgstr ""

msgid ""
"The telephony backend engine being used, asterisk is the only option "
"currently."
msgstr ""

msgid "VMX Default Context"
msgstr ""

msgid "VmX Locater"
msgstr ""

msgid ""
"Used to do extremely advanced and customized changes to the macro-vm VmX "
"locater. Check the dialplan for a thorough understanding of how to use this."
msgstr ""

msgid "VMX Default Loop Exceed Context"
msgstr ""

msgid ""
"Used to do extremely advanced and customized changes to the macro-vm VmX "
"locater. Check the dialplan for a thorough understanding of how to use this. "
"The default location that a caller will be sent if they press an invalid "
"options too many times, as defined by the Maximum Loops count."
msgstr ""

msgid "VMX Default Loop Exceed Extension"
msgstr ""

msgid "VMX Default Loop Exceed Priority"
msgstr ""

msgid "VMX Default Priority"
msgstr ""

msgid "VMX Default Timeout Context"
msgstr ""

msgid ""
"Used to do extremely advanced and customized changes to the macro-vm VmX "
"locater. Check the dialplan for a thorough understanding of how to use this. "
"The default location that a caller will be sent if they don't press any key "
"(timeout) or press # which is interpreted as a timeout. Set this to 'dovm' "
"to go to voicemail (default)."
msgstr ""

msgid "VMX Default Timeout Extension"
msgstr ""

msgid "VMX Default Timeout Priority"
msgstr ""

msgid "Terminate Call"
msgstr ""

msgid "Hangup"
msgstr ""

msgid "Congestion"
msgstr ""

msgid "Busy"
msgstr ""

msgid "Play SIT Tone (Zapateller)"
msgstr ""

msgid "Put caller on hold forever"
msgstr ""

msgid "Play ringtones to caller until they hangup"
msgstr ""

#, php-format
msgid "User Extension %s: %s"
msgstr ""

#, php-format
msgid "Trunk: %s (%s)"
msgstr ""

#, php-format
msgid "Calling Out Route: %s"
msgstr ""

msgid "A route for this DID/CID already exists!"
msgstr ""

msgid "You must put in a device id"
msgstr ""

msgid "This device id is already in use"
msgstr ""

msgid "User Extension: "
msgstr ""

#, php-format
msgid "Inbound Route: %s (%s)"
msgstr ""

#, php-format
msgid "%s: %s (%s)"
msgstr ""

msgid "You must put in an extension (or user) number"
msgstr ""

#, php-format
msgid "This user/extension %s is already in use"
msgstr ""

#, php-format
msgid "A route with this DID/CID: %s/%s already exists"
msgstr ""

msgid "Invalid Channel Number, must be numeric and not blank"
msgstr ""

msgid "Invalid DID, must be a non-blank DID"
msgstr ""

msgid "Error Duplicate Channel Entry"
msgstr ""

#, php-format
msgid "Outbound Route: %s"
msgstr ""

#, php-format
msgid ""
"Failed to open %s for writing, aborting attempt to write the country "
"indications. The file may be readonly or the permissions may be incorrect."
msgstr ""

msgid "Failed to write indications.conf"
msgstr ""

msgid "On Demand"
msgstr ""

msgid "Always"
msgstr ""

msgid "Never"
msgstr ""

msgid "Intercom"
msgstr ""

msgid "Screen Caller: No Memory"
msgstr ""

msgid "Screen Caller: Memory"
msgstr ""

msgid "Default"
msgstr ""

msgid "No Limit"
msgstr ""

msgid "deleted"
msgstr ""

msgid "Extension"
msgstr ""

#, php-format
msgid "Delete Extension %s"
msgstr ""

msgid "User"
msgstr ""

#, php-format
msgid "Delete User %s"
msgstr ""

msgid "Add User/Extension"
msgstr ""

msgid "Please enter a valid extension number."
msgstr ""

msgid "Please enter a valid CID Num Alias (must be a valid number)."
msgstr ""

msgid "Please enter valid User Password using numbers only"
msgstr ""

msgid "Please enter a valid Display Name"
msgstr ""

msgid "Please enter a valid Outbound CID"
msgstr ""

msgid "Please enter a valid pause time in seconds, using digits only"
msgstr ""

msgid ""
"You have entered a non-standard dialpattern for your DID. You can only enter "
"standard dialpatterns. You must use the inbound routing form to enter non-"
"standard patterns"
msgstr ""

msgid ""
"Please enter a valid Caller ID Number or leave it blank for your Assigned "
"DID/CID pair"
msgstr ""

msgid "Edit Extension"
msgstr ""

msgid "Add Extension"
msgstr ""

msgid "Edit User"
msgstr ""

msgid "Add User"
msgstr ""

msgid "User Extension"
msgstr ""

msgid "The extension number to dial to reach this user."
msgstr ""

msgid "User Password"
msgstr ""

msgid "A user will enter this password when logging onto a device."
msgstr ""

msgid "logs into a device."
msgstr ""

msgid "logs out of a device."
msgstr ""

msgid "Display Name"
msgstr ""

msgid ""
"The caller id name for calls from this user will be set to this name. Only "
"enter the name, NOT the number."
msgstr ""

msgid "CID Num Alias"
msgstr ""

msgid ""
"The CID Number to use for internal calls, if different from the extension "
"number. This is used to masquerade as a different user. A common example is "
"a team of support people who would like their internal callerid to display "
"the general support number (a ringgroup or queue). There will be no effect "
"on external calls."
msgstr ""

msgid "SIP Alias"
msgstr ""

msgid ""
"If you want to support direct sip dialing of users internally or through "
"anonymous sip calls, you can supply a friendly name that can be used in "
"addition to the users extension to call them."
msgstr ""

msgid "User Devices"
msgstr ""

msgid "Edit:"
msgstr ""

msgid "Extension Options"
msgstr ""

msgid "Outbound CID"
msgstr ""

msgid ""
"Overrides the caller id when dialing out a trunk. Any setting here will "
"override the common outbound caller id set in the Trunks admin."
"<br><br>Format: <b>\"caller name\" &lt;#######&gt;</b><br><br>Leave this "
"field blank to disable the outbound callerid feature for this user."
msgstr ""

msgid "Ring Time"
msgstr ""

msgid ""
"Number of seconds to ring prior to going to voicemail. Default will use the "
"value set in the General Tab. If no voicemail is configured this will be "
"ignored."
msgstr ""

msgid "Call Forward Ring Time"
msgstr ""

msgid ""
"Number of seconds to ring during a Call Forward, Call Forward Busy or Call "
"Forward Unavailable call prior to continuing to voicemail or specified "
"destination. Setting to Always will not return, it will just continue to "
"ring. Default will use the current Ring Time. If voicemail is disabled and "
"their is not destination specified, it will be forced into Always mode"
msgstr ""

msgid "Outbound Concurrency Limit"
msgstr ""

msgid ""
"Maximum number of outbound simultaneous calls that an extension can make. "
"This is also very useful as a Security Protection against a system that has "
"been compromised. It will limit the number of simultaneous calls that can be "
"made on the compromised extension."
msgstr ""

msgid "Call Waiting"
msgstr ""

msgid "Set the initial/current Call Waiting state for this user's extension"
msgstr ""

msgid "Internal Auto Answer"
msgstr ""

msgid ""
"When set to Intercom, calls to this extension/user from other internal users "
"act as if they were intercom calls meaning they will be auto-answered if the "
"endpoint supports this feature and the system is configured to operate in "
"this mode. All the normal white list and black list settings will be honored "
"if they are set. External calls will still ring as normal, as will certain "
"other circumstances such as blind transfers and when a Follow Me is "
"configured and enabled. If Disabled, the phone rings as a normal phone."
msgstr ""

msgid "Call Screening"
msgstr ""

msgid ""
"Call Screening requires external callers to say their name, which will be "
"played back to the user and allow the user to accept or reject the call.  "
"Screening with memory only verifies a caller for their caller-id once. "
"Screening without memory always requires a caller to say their name. Either "
"mode will always announce the caller based on the last introduction saved "
"with that callerid. If any user on the system uses the memory option, when "
"that user is called, the caller will be required to re-introduce themselves "
"and all users on the system will have that new introduction associated with "
"the caller's CallerId."
msgstr ""

msgid "Pinless Dialing"
msgstr ""

msgid ""
"Enabling Pinless Dialing will allow this extension to bypass any pin codes "
"normally required on outbound calls"
msgstr ""

msgid "Assigned DID/CID"
msgstr ""

msgid "DID Description"
msgstr ""

msgid "A description for this DID, such as \"Fax\""
msgstr ""

msgid "Add Inbound DID"
msgstr ""

msgid ""
"A direct DID that is associated with this extension. The DID should be in "
"the same format as provided by the provider (e.g. full number, 4 digits for "
"10x4, etc).<br><br>Format should be: <b>XXXXXXXXXX</b><br><br>.An optional "
"CID can also be associated with this DID by setting the next box"
msgstr ""

msgid "Add Inbound CID"
msgstr ""

msgid ""
"Add a CID for more specific DID + CID routing. A DID must be specified in "
"the above Add DID box. In addition to standard dial sequences, you can also "
"put Private, Blocked, Unknown, Restricted, Anonymous and Unavailable in "
"order to catch these special cases if the Telco transmits them."
msgstr ""

msgid "DID / CID"
msgstr ""

msgid "Any DID"
msgstr ""

msgid "Recording Options"
msgstr ""

msgid "Record Incoming"
msgstr ""

msgid "Record all inbound calls received at this extension."
msgstr ""

msgid "Record Outgoing"
msgstr ""

msgid "Record all outbound calls received at this extension."
msgstr ""

msgid "Optional Destinations"
msgstr ""

msgid ""
"Optional destination call is routed to when the call is not answered on an "
"otherwise idle phone. If the phone is in use and the call is simply ignored, "
"then the busy destination will be used."
msgstr ""

msgid "Optional destination call is routed to when the call is not answered."
msgstr ""

msgid "Unavail Voicemail if Enabled"
msgstr ""

msgid "No Answer"
msgstr ""

msgid "CID Prefix"
msgstr ""

msgid ""
"Optional CID Prefix to add before sending to this no answer destination."
msgstr ""

msgid ""
"Optional destination the call is routed to when the phone is busy or the "
"call is rejected by the user. This destination is also used on an unanswered "
"call if the phone is in use and the user chooses not to pickup the second "
"call."
msgstr ""

msgid ""
"Optional destination the call is routed to when the phone is busy or the "
"call is rejected by the user."
msgstr ""

msgid "Busy Voicemail if Enabled"
msgstr ""

msgid "Optional CID Prefix to add before sending to this busy destination."
msgstr ""

msgid ""
"Optional destination the call is routed to when the phone is offline, such "
"as a softphone currently off or a phone unplugged."
msgstr ""

msgid "Not Reachable"
msgstr ""

msgid ""
"Optional CID Prefix to add before sending to this not reachable destination."
msgstr ""

msgid "Warning! Extension"
msgstr ""

msgid "is not allowed for your account"
msgstr ""

msgid "Conflicting Extensions"
msgstr ""

msgid ""
"The following extension numbers are in conflict, you can click on the item"
"(s) below to edit the conflicting entity."
msgstr ""

msgid "Configure user again:"
msgstr ""

msgid "Configure extension again:"
msgstr ""

msgid "Please enter the dtmfmode for this device"
msgstr ""

msgid "Please enter the channel for this device"
msgstr ""

msgid ""
"You have not entered a Secret for this device, although this is possible it "
"is generally bad practice to not assign a Secret to a device. Are you sure "
"you want to leave the Secret empty?"
msgstr ""

msgid "Please enter a Secret for this device"
msgstr ""

msgid "The Zap channel number for this port."
msgstr ""

msgid ""
"Asterisk context this device will send calls to. Only change this is you "
"know what you are doing."
msgstr ""

msgid "Yes"
msgstr ""

msgid "No"
msgstr ""

msgid "Zap immediate mode setting, see Zap documentation for details."
msgstr ""

msgid ""
"Zap signaling, usually fxo_ks when connected to an analog phone. Some "
"special applications or channel bank connections may require fxs_ks or other "
"valid settings. See Zap and card documentation for details."
msgstr ""

msgid "Zap echocancel setting, see Zap documentation for details."
msgstr ""

msgid ""
"Whether to turn on echo cancellation when bridging between Zap channels. See "
"Zap documentation for details."
msgstr ""

msgid ""
"Echo training requirements of this card. See Zap documentation for details."
msgstr ""

msgid ""
"Experimental and un-reliable setting to try and detect a busy signal. See "
"Zap documentation for details."
msgstr ""

msgid ""
"Experimental and un-reliable setting to try and detect a busy signal, number "
"of iterations to conclude busy. See Zap documentation for details."
msgstr ""

msgid ""
"Experimental and un-reliable setting to try and detect call progress tones. "
"See Zap documentation for details."
msgstr ""

msgid ""
"How to dial this device, this should not be changed unless you know what you "
"are doing."
msgstr ""

msgid "Accountcode for this device."
msgstr ""

msgid ""
"Callgroup(s) that this device is part of, can be one or more callgroups, e."
"g. '1,3-5' would be in groups 1,3,4,5."
msgstr ""

msgid ""
"Pickupgroups(s) that this device can pickup calls from, can be one or more "
"groups, e.g. '1,3-5' would be in groups 1,3,4,5. Device does not have to be "
"in a group to be able to pickup calls from that group."
msgstr ""

msgid ""
"Mailbox for this device. This should not be changed unless you know what you "
"are doing."
msgstr ""

msgid "The DAHDi channel number for this port."
msgstr ""

msgid "DAHDi immediate mode setting, see DAHDi documentation for details."
msgstr ""

msgid ""
"DAHDi signalling, usually fxo_ks when connected to an analog phone. Some "
"special applications or channel bank connections may require fxs_ks or other "
"valid settings. See DAHDi and card documentation for details."
msgstr ""

msgid "DAHDi echocancel setting, see DAHDi documentation for details."
msgstr ""

msgid ""
"Whether to turn on echo cancellation when bridging between DAHDi channels. "
"See DAHDi documentation for details."
msgstr ""

msgid ""
"Echo training requirements of this card. See DAHDi documentation for details."
msgstr ""

msgid ""
"Experimental and un-reliable setting to try and detect a busy signal. See "
"DAHDi documentation for details."
msgstr ""

msgid ""
"Experimental and un-reliable setting to try and detect a busy signal, number "
"of iterations to conclude busy. See DAHDi documentation for details."
msgstr ""

msgid ""
"Experimental and un-reliable setting to try and detect call progress tones. "
"See DAHDi documentation for details."
msgstr ""

msgid ""
"Password (secret) configured for the device. Should be alphanumeric with at "
"least 2 letters and numbers to keep secure."
msgstr ""

msgid "Media Only"
msgstr ""

msgid "IAX transfer capabilities, see the Asterisk documentation for details."
msgstr ""

msgid "Host settings for this device, almost always dynamic for endpoints."
msgstr ""

msgid "Asterisk connection type, usually friend for endpoints."
msgstr ""

msgid "Endpoint port number to use, usually 4569."
msgstr ""

msgid ""
"Setting to yes (equivalent to 2000 msec) will send an OPTIONS packet to the "
"endpoint periodically (default every minute). Used to monitor the health of "
"the endpoint. If delays are longer then the qualify time, the endpoint will "
"be taken offline and considered unreachable. Can be set to a value which is "
"the msec threshold. Setting to no will turn this off. Can also be helpful to "
"keep NAT pinholes open."
msgstr ""

msgid ""
"Disallowed codecs. Set this to all to remove all codecs defined in the "
"general settings and then specify specific codecs separated by '&' on the "
"'allow' setting, or just disallow specific codecs separated by '&'."
msgstr ""

msgid ""
"Allow specific codecs, separated by the '&' sign and in priority order. E.g. "
"'ulaw&g729'. Codecs allowed in the general settings will also be allowed "
"unless removed with the 'disallow' directive."
msgstr ""

msgid "IP Address range to deny access to, in the form of network/netmask."
msgstr ""

msgid ""
"IP Address range to allow access to, in the form of network/netmask. This "
"can be a very useful security option when dealing with remote extensions "
"that are at a known location (such as a branch office) or within a known ISP "
"range for some home office situations."
msgstr ""

msgid "Auto"
msgstr ""

msgid ""
"IAX security setting. See IAX documentation and device compatibility for "
"details."
msgstr ""

msgid "RFC 2833"
msgstr ""

msgid "In band audio"
msgstr ""

msgid "SIP INFO (application/dtmf-relay"
msgstr ""

msgid "SIP INFO (application/dtmf)"
msgstr ""

msgid ""
"The DTMF signaling mode used by this device, usually rfc2833 for most phones."
msgstr ""

msgid ""
"Re-Invite policy for this device, see Asterisk documentation for details."
msgstr ""

msgid ""
"Whether Asterisk should trust the RPID settings from this device. Usually "
"should be yes for CONNECTEDLINE() functionality to work if supported by the "
"endpoint."
msgstr ""

msgid "Send Remote-Party-ID header"
msgstr ""

msgid "Send P-Asserted-Identity header"
msgstr ""

msgid ""
"Whether Asterisk should send RPID (or PAI) info to the device. Usually "
"should be enabled to the settings used by your device for CONNECTEDLINE() "
"functionality to work if supported by the endpoint."
msgstr ""

msgid "No - RFC3581"
msgstr ""

msgid "never - no RFC3581"
msgstr ""

msgid "route - NAT no rport"
msgstr ""

msgid ""
"NAT setting, see Asterisk documentation for details. Yes usually works for "
"both internal and external devices. Set to No if the device will always be "
"internal."
msgstr ""

msgid ""
"Endpoint port number to use, usually 5060. Some 2 ports devices such as ATA "
"may used 5061 for the second port."
msgstr ""

msgid ""
"Setting to yes (equivalent to 2000 msec) will send an OPTIONS packet to the "
"endpoint periodically (default every minute). Used to monitor the health of "
"the endpoint. If delays are longer then the qualify time, the endpoint will "
"be taken offline and considered unreachable. Can be set to a value which is "
"the msec threshhold. Setting to no will turn this off. Can also be helpful "
"to keep NAT pinholes open."
msgstr ""

msgid "Frequency in seconds to send qualify messages to the endpoint."
msgstr ""

msgid "All - UDP Primary"
msgstr ""

msgid "All - TCP Primary"
msgstr ""

msgid "All - TLS Primary"
msgstr ""

msgid "UDP Only"
msgstr ""

msgid "TCP Only"
msgstr ""

msgid "TLS Only"
msgstr ""

msgid ""
"This sets the allowed transport settings for this device and the default "
"(Primary) transport for outgoing. The default transport is only used for "
"outbound messages until a registration takes place.  During the peer "
"registration the transport type may change to another supported type if the "
"peer requests so. In most common cases, this does not have to be changed as "
"most devices register in conjunction with the host=dynamic setting. If you "
"are using TCP and/or TLS you need to make sure the general SIP Settings are "
"configured for the system to operate in those modes and for TLS, proper "
"certificates have been generated and configured."
msgstr ""

msgid "Yes (SRTP only)"
msgstr ""

msgid ""
"Whether to offer SRTP encrypted media (and only SRTP encrypted media) on "
"outgoing calls to a peer. Calls will fail with HANGUPCAUSE=58 if the peer "
"does not support SRTP. Defaults to no."
msgstr ""

msgid ""
"Asterisk dialplan extension to reach voicemail for this device. Some devices "
"use this to auto-program the voicemail button on the endpoint. If left "
"blank, the default vmexten setting is automatically configured by the "
"voicemail module. Only change this on devices that may have special needs."
msgstr ""

msgid ""
"How to dial this device. This will be device specific. For example, a custom "
"device which is really a remote SIP URI might be configured such as SIP/"
"joe@somedomain.com"
msgstr ""

msgid "Generic SIP Device"
msgstr ""

msgid "Generic IAX2 Device"
msgstr ""

msgid "Generic ZAP Device"
msgstr ""

msgid "Generic DAHDI Device"
msgstr ""

msgid "Other (Custom) Device"
msgstr ""

msgid "None (virtual exten)"
msgstr ""

msgid "Fixed"
msgstr ""

msgid "Adhoc"
msgstr ""

msgid "none"
msgstr ""

msgid "New User"
msgstr ""

msgid "Add Device"
msgstr ""

msgid "Add an Extension"
msgstr ""

msgid "Please select your Device below then click Submit"
msgstr ""

msgid "Device"
msgstr ""

#, php-format
msgid "Delete Device %s"
msgstr ""

#, php-format
msgid "Edit Default User: %s"
msgstr ""

#, php-format
msgid "Edit Fixed User: %s"
msgstr ""

#, php-format
msgid "Add %s Device"
msgstr ""

#, php-format
msgid "Add %s Extension"
msgstr ""

msgid "Please enter a device id."
msgstr ""

msgid "Please enter a valid Description for this device"
msgstr ""

msgid "Please enter a valid Emergency CID"
msgstr ""

msgid "Device Info"
msgstr ""

msgid "Device ID"
msgstr ""

msgid ""
"Give your device a unique integer ID.  The device will use this ID to "
"authenticate to the system."
msgstr ""

msgid ""
"The caller id name for this device will be set to this description until it "
"is logged into."
msgstr ""

msgid "Emergency CID"
msgstr ""

msgid ""
"This caller id will always be set when dialing out an Outbound Route flagged "
"as Emergency.  The Emergency CID overrides all other caller id settings."
msgstr ""

msgid "Device Type"
msgstr ""

msgid ""
"Devices can be fixed or adhoc. Fixed devices are always associated to the "
"same extension/user. Adhoc devices can be logged into and logged out of by "
"users."
msgstr ""

msgid "Default User"
msgstr ""

msgid ""
"Fixed devices will always mapped to this user.  Adhoc devices will be mapped "
"to this user by default.<br><br>If selecting 'New User', a new User "
"Extension of the same Device ID will be set as the Default User."
msgstr ""

msgid "Device Options"
msgstr ""

#, php-format
msgid "This device uses %s technology."
msgstr ""

msgid "Via DAHDI compatibility mode"
msgstr ""

msgid "User Logon"
msgstr ""

msgid "User Logoff"
msgstr ""

msgid "ZapBarge"
msgstr ""

msgid "ChanSpy"
msgstr ""

msgid "Simulate Incoming Call"
msgstr ""

msgid "Directed Call Pickup"
msgstr ""

msgid "Asterisk General Call Pickup"
msgstr ""

msgid "In-Call Asterisk Blind Transfer"
msgstr ""

msgid "In-Call Asterisk Attended Transfer"
msgstr ""

msgid "In-Call Asterisk Toggle Call Recording"
msgstr ""

msgid "In-Call Asterisk Disconnect Code"
msgstr ""

#, php-format
msgid "ERROR: trying to check if %s already in use"
msgstr ""

msgid "Checking if directdids need migrating.."
msgstr ""

msgid "starting migration"
msgstr ""

msgid "User: "
msgstr ""

#, php-format
msgid "ERROR: failed to insert %s for user %s"
msgstr ""

#, php-format
msgid ""
"There were %s failures migrating directdids, users table not being changed"
msgstr ""

#, php-format
msgid "Removing field %s from users table.."
msgstr ""

msgid "not present"
msgstr ""

msgid "removed"
msgstr ""

msgid ""
"ERROR: could not access user table to migrate directdids to incoming table, "
"aborting"
msgstr ""

msgid "already done"
msgstr ""

msgid "updating zap callgroup, pickupgroup.."
msgstr ""

#, php-format
msgid "updated %s callgroups, %s pickupgroups"
msgstr ""

msgid "not needed"
msgstr ""

msgid "checking for delay_answer field .."
msgstr ""

msgid "fatal error"
msgstr ""

msgid "added"
msgstr ""

msgid "already exists"
msgstr ""

msgid "checking for pricid field .."
msgstr ""

msgid "Checking for Global var RECORDING_STATE.."
msgstr ""

msgid "Created"
msgstr ""

msgid "Already exists!"
msgstr ""

msgid "Checking if trunk table migration required.."
msgstr ""

msgid "migrating.."
msgstr ""

msgid "removing globals.."
msgstr ""

msgid "done"
msgstr ""

msgid "Checking if privacy manager options exists.."
msgstr ""

msgid "Added pmmaxretries and pmminlength"
msgstr ""

#, php-format
msgid "Checking for %s field.."
msgstr ""

msgid "Checking for General Setting migrations.."
msgstr ""

msgid "preparing"
msgstr ""

#, php-format
msgid "%s prepared"
msgstr ""

msgid "General Settings migrated"
msgstr ""

msgid "Deleting migrated settings.."
msgstr ""

msgid "Fatal DB error trying to delete globals, trying to carry on"
msgstr ""

#, php-format
msgid "Discontinued logging type %s changing to %s.."
msgstr ""

msgid "ok"
msgstr ""

msgid "Converting IAX notransfer to transfer if needed.."
msgstr ""

#, php-format
msgid "updated %s records"
msgstr ""

msgid ""
"You must run 'amportal restart' from the Linux command line before you can "
"save setting here."
msgstr ""

msgid ""
"You have un-saved changes, press OK to disregard changes and reload page or "
"Cancel to abort."
msgstr ""

msgid ""
"Your Display settings have been changed, click on 'Refresh Page' to view the "
"affects of your changes once you have saved other outstanding changes that "
"are still un-confirmed."
msgstr ""

msgid "FreePBX Advanced Settings"
msgstr ""

msgid "<b>IMPORTANT:</b> Use extreme caution when making changes!"
msgstr ""

msgid ""
"Some of these settings can render your system inoperable. You are urged to "
"backup before making any changes. Readonly settings are usually more "
"volatile, they can be changed by changing 'Override Readonly Settings' to "
"true. Once changed you must save the setting by checking the green check box "
"that appears. You can restore the default setting by clicking on the icon to "
"the right of the values if not set at default."
msgstr ""

msgid "True"
msgstr ""

msgid "False"
msgstr ""

msgid "No Default Provided"
msgstr ""

#, php-format
msgid "Default Value: %s"
msgstr ""

msgid "field can be left blank"
msgstr ""

#, php-format
msgid "Acceptable Values: %s - %s"
msgstr ""

#, php-format
msgid "Internal Name: %s"
msgstr ""

#, php-format
msgid "Friendly Name: %s"
msgstr ""

msgid "Revert to Default"
msgstr ""

msgid "Save"
msgstr ""

msgid "Refresh Page"
msgstr ""

msgid "Edit Administrator"
msgstr ""

#, php-format
msgid "Delete User: %s"
msgstr ""

msgid "Add Administrator"
msgstr ""

msgid "NOTE:"
msgstr ""

msgid ""
"Authorization Type is not set to 'database' in Advanced Setting - note that "
"this module is not currently providing access control, and changing "
"passwords here or adding users will have no effect unless Authorization Type "
"is set to 'database'."
msgstr ""

msgid "Username<span>Create a unique username for this new user</span>"
msgstr ""

msgid "Password<span>Create a password for this new user</span>"
msgstr ""

msgid "Access Restrictions"
msgstr ""

msgid ""
"Department Name<span>Restrict this user's view of Digital Receptionist menus "
"and System Recordings to only those for this department.</span>"
msgstr ""

msgid ""
"Extension Range<span>Restrict this user's view to only Extensions, Ring "
"Groups, and Queues within this range.</span>"
msgstr ""

msgid ""
"Admin Access<span>Select the Admin Sections this user should have access to."
"</span>"
msgstr ""

msgid "Apply Changes Bar"
msgstr ""

msgid "ALL SECTIONS"
msgstr ""

msgid "Submit Changes"
msgstr ""

msgid "Username must not be blank"
msgstr ""

msgid ""
"Username cannot start with a number, and can only contain letters and numbers"
msgstr ""

msgid "For security reasons, you cannot use the department name default"
msgstr ""

msgid "Department name cannot have a space"
msgstr ""

msgid " (toggle sort)"
msgstr ""

msgid "Add Incoming Route"
msgstr ""

msgid "All DIDs"
msgstr ""

msgid "User DIDs"
msgstr ""

msgid "General DIDs"
msgstr ""

msgid "Unused DIDs"
msgstr ""

msgid "any DID"
msgstr ""

msgid "any CID"
msgstr ""

msgid "Route"
msgstr ""

#, php-format
msgid "Delete Route %s"
msgstr ""

#, php-format
msgid "Edit %s"
msgstr ""

#, php-format
msgid "Edit %s %s (%s)"
msgstr ""

msgid "Edit Incoming Route"
msgstr ""

msgid "Provide a meaningful description of what this incoming route is"
msgstr ""

msgid "DID Number"
msgstr ""

msgid ""
"Define the expected DID Number if your trunk passes DID on incoming calls. "
"<br><br>Leave this blank to match calls with any or no DID info.<br><br>You "
"can also use a pattern match (eg _2[345]X) to match a range of numbers"
msgstr ""

msgid "Caller ID Number"
msgstr ""

msgid ""
"Define the Caller ID Number to be matched on incoming calls.<br><br>Leave "
"this field blank to match any or no CID info. In addition to standard dial "
"sequences, you can also put Private, Blocked, Unknown, Restricted, Anonymous "
"and Unavailable in order to catch these special cases if the Telco transmits "
"them."
msgstr ""

msgid "CID Priority Route"
msgstr ""

msgid ""
"This effects CID ONLY routes where no DID is specified. If checked, calls "
"with this CID will be routed to this route, even if there is a route to the "
"DID that was called. Normal behavior is for the DID route to take the calls. "
"If there is a specific DID/CID route for this CID, that route will still "
"take the call when that DID is called."
msgstr ""

msgid "Options"
msgstr ""

msgid "Alert Info"
msgstr ""

msgid "ALERT_INFO can be used for distinctive ring with SIP devices."
msgstr ""

msgid "CID name prefix"
msgstr ""

msgid ""
"You can optionally prefix the Caller ID name. ie: If you prefix with \"Sales:"
"\", a call from John Doe would display as \"Sales:John Doe\" on the "
"extensions that ring."
msgstr ""

msgid "Music On Hold"
msgstr ""

msgid ""
"Set the MoH class that will be used for calls that come in on this route. "
"For example, choose a type appropriate for routes coming in from a country "
"which may have announcements in their language."
msgstr ""

msgid "No Music"
msgstr ""

msgid "Signal RINGING"
msgstr ""

msgid ""
"Some devices or providers require RINGING to be sent before ANSWER. You'll "
"notice this happening if you can send calls directly to a phone, but if you "
"send it to an IVR, it won't connect the call."
msgstr ""

msgid "Pause Before Answer"
msgstr ""

msgid ""
"An optional delay to wait before processing this route. Setting this value "
"will delay the channel from answering the call. This may be handy if "
"external fax equipment or security systems are installed in parallel and you "
"would like them to be able to seize the line."
msgstr ""

msgid "Privacy"
msgstr ""

msgid "Privacy Manager"
msgstr ""

msgid ""
"If no Caller ID has been received, Privacy Manager will ask the caller to "
"enter their phone number. If an user/extension has Call Screening enabled, "
"the incoming caller will be be prompted to say their name when the call "
"reaches the user/extension."
msgstr ""

msgid "Max attempts"
msgstr ""

msgid "Number of attempts the caller has to enter a valid callerID"
msgstr ""

msgid "Min Length"
msgstr ""

msgid ""
"Minimum amount of digits callerID needs to contain in order to be considered "
"valid"
msgstr ""

msgid "Set Destination"
msgstr ""

msgid "Clear Destination & Submit"
msgstr ""

msgid "Please enter a valid DID Number"
msgstr ""

msgid "Please enter a valid Caller ID Number"
msgstr ""

msgid "Please enter a valid Fax Email or leave it empty to use the default"
msgstr ""

msgid "Please enter a valid number for Pause after answer"
msgstr ""

msgid "Please enter a valid number for Pause Before Answer field"
msgstr ""

msgid ""
"Leaving the DID Number AND the Caller ID Number empty will match all "
"incoming calls received not routed using any other defined Incoming Route.\\n"
"\\nAre you sure?"
msgstr ""

msgid ""
"DID information is normally just an incoming telephone number or for "
"advanced users, a valid Asterisk Dial Pattern\\n\\nYou have entered a non "
"standard DID pattern.\\n\\nAre you sure this is correct?"
msgstr ""

msgid "A Slash ('/') is never a valid DID. Please remove it and try again"
msgstr ""

msgid "Invalid Caller ID prefix."
msgstr ""

msgid "Dialing Options"
msgstr ""

msgid "Asterisk Dial command options:"
msgstr ""

msgid "t: Allow the called user to transfer the call by hitting #"
msgstr ""

msgid "T: Allow the calling user to transfer the call by hitting #"
msgstr ""

msgid "r: Generate a ringing tone for the calling party"
msgstr ""

msgid ""
"x or w: Allow the called user to start recording using One-Touch Recording"
msgstr ""

msgid ""
"X or W: Allow the calling user to start recording using One-Touch Recording"
msgstr ""

msgid ""
"Choose automixmon (x/X) or automon (w/W) for One-Touch Recording in Advanced "
"Settings"
msgstr ""

msgid "See Asterisk documentation for other advanced options."
msgstr ""

msgid "Asterisk Outbound Dial command options:"
msgstr ""

msgid "r: You SHOULD NOT use this option on outbound trunks"
msgstr ""

msgid "Call Recording"
msgstr ""

msgid "Extension Recording Override:"
msgstr ""

msgid ""
"This will override the recording settings of all extensions/users. If "
"enabled, the system will ignore all Record Always settings of a user and "
"will not turn on recording. This does not effect On Demand recording "
"controlled by the dial options 'w' and 'W' above. It does not effect other "
"recording settings in modules such as Queues and Conferences. If you don't "
"use recordings, setting this is beneficial to system performance as it "
"removes the check that is otherwise done on every single call."
msgstr ""

msgid "Call recording format:"
msgstr ""

msgid "Pick the format in which to save recorded calls"
msgstr ""

msgid "WAV"
msgstr ""

msgid "wav"
msgstr ""

msgid "ulaw"
msgstr ""

msgid "alaw"
msgstr ""

msgid "sln"
msgstr ""

msgid "gsm"
msgstr ""

msgid "g729"
msgstr ""

msgid "Voicemail"
msgstr ""

msgid "Ringtime Default:"
msgstr ""

msgid ""
"Default number of seconds to ring phones before sending callers to "
"voicemail. This can be set per extension/user and will have no effect on "
"phones with no voicemail."
msgstr ""

msgid "Direct Dial Voicemail Prefix:"
msgstr ""

msgid ""
"Prefix used to dial directly to someone's voicemail. Caution should be taken "
"in choosing this prefix to avoid conflicts with featurecodes."
msgstr ""

msgid "Direct Dial to Voicemail message type:"
msgstr ""

msgid ""
"Default message type to use when dialing direct to an extensions voicemail"
msgstr ""

msgid "Unavailable"
msgstr ""

msgid "No Message"
msgstr ""

msgid "Optional Voicemail Recording Gain:"
msgstr ""

msgid "Use the specified amount of gain when recording the voicemail message."
msgstr ""

msgid "The units are whole-number decibels (dB)."
msgstr ""

msgid "Do Not Play \"please leave message after tone\" to caller"
msgstr ""

msgid ""
"Check this to remove the default message \"Please leave your message after "
"the tone. When done, hang-up, or press the pound key.\" That is played after "
"the voicemail greeting (the s option). This applies globally to all vm boxes."
msgstr ""

msgid "Operator Extension:"
msgstr ""

msgid ""
"Default number to dial when callers hit '0' from voicemail or the built in "
"IVR directory (it has no effect on the Directory Module). This does NOT need "
"to be an extension, it can be a Ring Group, or even an external number."
msgstr ""

msgid "Voicemail VmX Locator"
msgstr ""

msgid "Timeout VM Msg:"
msgstr ""

msgid ""
"If this destination is voicemail, select whether or not to play the standard "
"voicemail instructions or just beep."
msgstr ""

msgid "Std Instructions"
msgstr ""

msgid "Beep Only"
msgstr ""

msgid "Max Loop VM Msg:"
msgstr ""

msgid "Direct VM Option"
msgstr ""

msgid ""
"If a user defined option is to go to voicemail (using the 'dovm' extension) "
"this is the default option if not specified by the user's settings."
msgstr ""

msgid "Msg Timeout:"
msgstr ""

msgid ""
"Time to wait after message has played to timeout and/or repeat the message "
"if no entry pressed."
msgstr ""

msgid "seconds"
msgstr ""

msgid "Msg Play:"
msgstr ""

msgid ""
"Number of times to play the recorded message if the caller does not press "
"any options and it times out."
msgstr ""

msgid "times"
msgstr ""

msgid "Error Re-tries:"
msgstr ""

msgid ""
"Number of times to play invalid options and repeat the message upon "
"receiving an undefined option."
msgstr ""

msgid "Legacy Company Directory"
msgstr ""

msgid "Find users in the Company Directory by:"
msgstr ""

msgid ""
"The Company Directory allows a caller to spell the user's first name, last "
"name, or both when searching for a user. This will select which of these "
"modes are used."
msgstr ""

msgid "first name"
msgstr ""

msgid "last name"
msgstr ""

msgid "first or last name"
msgstr ""

msgid "Announce Extension:"
msgstr ""

msgid ""
"Plays a message \"Please hold while I transfer you to extension xxx\" that "
"lets the caller know what extension to use in the future when connecting "
"from the company directory."
msgstr ""

msgid "International Settings"
msgstr ""

msgid "Country Indications"
msgstr ""

msgid "Select which country you are in"
msgstr ""

msgid "24-hour format"
msgstr ""

msgid ""
"Select Yes if you use 24-hour format or No if you are using 12-hour am/pm "
"format"
msgstr ""

msgid "no"
msgstr ""

msgid "yes"
msgstr ""

msgid "Security Settings"
msgstr ""

msgid "Allow Anonymous Inbound SIP Calls?"
msgstr ""

msgid "** WARNING **"
msgstr ""

msgid ""
"Setting this to 'yes' will potentially allow ANYBODY to call into your "
"Asterisk server using the SIP protocol"
msgstr ""

msgid ""
"It should only be used if you fully understand the impact of allowing "
"anonymous calls into your server"
msgstr ""

msgid "Online Updates"
msgstr ""

msgid "Check for Updates"
msgstr ""

msgid ""
"Choosing Yes will result in the system automatically checking for updates "
"nightly. The resulting information will be displayed in the dashboard and "
"will be optionally emailed to the address below if provided.<br />This will "
"transmit your FreePBX and Asterisk version numbers along with a unique but "
"random identifier. This is used to provide proper update information and to "
"track version usage to focus development and maintenance efforts. No private "
"information is transmitted."
msgstr ""

msgid "Update Email"
msgstr ""

msgid ""
"Email address where online updates will be sent. Leaving blank will result "
"in no updates being sent."
msgstr ""

msgid "Please enter a valid Number of Seconds"
msgstr ""

msgid "Please enter a valid Fax Email"
msgstr ""

msgid ""
"You have selected the 'r' option for your trunks. This is highly discouraged "
"and will create problems with calls on many PRI, VoIP, ISDN and other trunks "
"that are capable of signaling. Asterisk will generate a ringing tone until "
"the signaling indicates the line is answered. This will result in some "
"external IVRs being inaccessible and other strange problems."
msgstr ""

msgid "Error fetching prefix list for: "
msgstr ""

msgid "Invalid format for NPA-NXX code (must be format: NXXNXX)"
msgstr ""

msgid ""
"An unknown error occurred repositioning routes, refresh your browser to see "
"the current correct route positions"
msgstr ""

msgid "Add Route"
msgstr ""

msgid "Drag up or down to reposition, click to choose"
msgstr ""

msgid "Edit Route"
msgstr ""

msgid "Route Settings"
msgstr ""

msgid "Route Name"
msgstr ""

msgid ""
"Name of this route. Should be used to describe what type of calls this route "
"matches (for example, 'local' or 'longdistance')."
msgstr ""

msgid "Route CID"
msgstr ""

msgid ""
"Optional Route CID to be used for this route. If set, this will override all "
"CIDS specified except:<ul><li>extension/device EMERGENCY CIDs if this route "
"is checked as an EMERGENCY Route</li><li>trunk CID if trunk is set to force "
"it's CID</li><li>Forwarded call CIDs (CF, Follow Me, Ring Groups, etc)</"
"li><li>Extension/User CIDs if checked</li></ul>"
msgstr ""

msgid "Override Extension"
msgstr ""

msgid ""
"If checked the extension's Outbound CID will be ignored in favor of this "
"CID. The extension's Emergency CID will still be used if the route is an "
"Emergency Route and the Extension has a defined Emergency CID."
msgstr ""

msgid "Route Password"
msgstr ""

msgid ""
"Optional: A route can prompt users for a password before allowing calls to "
"progress.  This is useful for restricting calls to international "
"destinations or 1-900 numbers.<br><br>A numerical password, or the path to "
"an Authenticate password file can be used.<br><br>Leave this field blank to "
"not prompt for password."
msgstr ""

msgid "Route Type"
msgstr ""

msgid ""
"Optional: Selecting Emergency will enforce the use of a device's Emergency "
"CID setting (if set).  Select this option if this route is used for "
"emergency dialing (ie: 911)."
msgstr ""

msgid ""
"Optional: Selecting Intra-Company will treat this route as an intra-company "
"connection, preserving the internal Caller ID information instead of the "
"outbound CID of either the extension or trunk."
msgstr ""

msgid "Emergency"
msgstr ""

msgid "Intra-Company"
msgstr ""

msgid "Music On Hold?"
msgstr ""

msgid ""
"You can choose which music category to use. For example, choose a type "
"appropriate for a destination country which may have announcements in the "
"appropriate language."
msgstr ""

msgid "default"
msgstr ""

msgid "Time Group:"
msgstr ""

msgid ""
"If this route should only be available during certain times then Select a "
"Time Group created under Time Groups. The route will be ignored outside of "
"times specified in that Time Group. If left as default of Permanent Route "
"then it will always be available."
msgstr ""

msgid "---Permanent Route---"
msgstr ""

msgid "Route Position"
msgstr ""

msgid "Where to insert this route or relocate it relative to the other routes."
msgstr ""

#, php-format
msgid "First before %s"
msgstr ""

msgid "---No Change---"
msgstr ""

#, php-format
msgid "Before %s"
msgstr ""

#, php-format
msgid "Last after %s"
msgstr ""

msgid "Additional Settings"
msgstr ""

msgid "Dial Patterns that will use this Route"
msgstr ""

msgid ""
"A Dial Pattern is a unique set of digits that will select this route and "
"send the call to the designated trunks. If a dialed pattern matches this "
"route, no subsequent routes will be tried. If Time Groups are enabled, "
"subsequent routes will be checked for matches outside of the designated time"
"(s)."
msgstr ""

msgid "Rules:"
msgstr ""

msgid "matches any digit from 0-9"
msgstr ""

msgid "matches any digit from 1-9"
msgstr ""

msgid "matches any digit from 2-9"
msgstr ""

msgid "matches any digit in the brackets (example: 1,2,3,7,8,9)"
msgstr ""

msgid "wildcard, matches one or more dialed digits"
msgstr ""

msgid "prepend:"
msgstr ""

msgid ""
"Digits to prepend to a successful match. If the dialed number matches the "
"patterns specified by the subsequent columns, then this will be prepended "
"before sending to the trunks."
msgstr ""

msgid "prefix:"
msgstr ""

msgid ""
"Prefix to remove on a successful match. The dialed number is compared to "
"this and the subsequent columns for a match. Upon a match, this prefix is "
"removed from the dialed number before sending it to the trunks."
msgstr ""

msgid "match pattern:"
msgstr ""

msgid ""
"The dialed number will be compared against the  prefix + this match pattern. "
"Upon a match, the match pattern portion of the dialed number will be sent to "
"the trunks"
msgstr ""

msgid "CallerID:"
msgstr ""

msgid ""
"If CallerID is supplied, the dialed number will only match the prefix + "
"match pattern if the CallerID being transmitted matches this. When "
"extensions make outbound calls, the CallerID will be their extension number "
"and NOT their Outbound CID. The above special matching sequences can be used "
"for CallerID matching similar to other number matches."
msgstr ""

msgid "prepend"
msgstr ""

msgid "prefix"
msgstr ""

msgid "match pattern"
msgstr ""

msgid "CallerId"
msgstr ""

msgid "Dial patterns wizards"
msgstr ""

msgid ""
"These options provide a quick way to add outbound dialing rules. Follow the "
"prompts for each."
msgstr ""

msgid "Lookup local prefixes"
msgstr ""

msgid ""
"This looks up your local number on www.localcallingguide.com (NA-only), and "
"sets up so you can dial either 7, 10 or 11 digits (5551234, 6135551234, "
"16135551234) to access this route."
msgstr ""

msgid "Upload from CSV"
msgstr ""

#, php-format
msgid ""
"Upload patterns from a CSV file replacing existing entries. If there are no "
"headers then the file must have 4 columns of patterns in the same order as "
"in the GUI. You can also supply headers: %s, %s, %s and %s in the first row. "
"If there are less then 4 recognized headers then the remaining columns will "
"be blank"
msgstr ""

msgid ""
"What is your areacode + prefix (NPA-NXX)?\\n\\n(Note: this database contains "
"North American numbers only, and is not guaranteed to be 100% accurate. You "
"will still have the option of modifying results.)\\n\\nThis may take a few "
"seconds."
msgstr ""

msgid "Invalid NPA-NXX. Must be of the format \\'NXX-NXX\\'"
msgstr ""

msgid ""
"Error: Cannot continue!\\n\\nPrefix lookup requires cURL support in PHP on "
"the server. Please install or enable cURL support in your PHP installation "
"to use this function. See http://www.php.net/curl for more information."
msgstr ""

msgid "NXXXXXX"
msgstr ""

msgid "NXXXXXX,NXXNXXXXXX"
msgstr ""

msgid "1800NXXXXXX,1888NXXXXXX,1877NXXXXXX,1866NXXXXXX"
msgstr ""

msgid "1NXXNXXXXXX"
msgstr ""

msgid "011."
msgstr ""

msgid "411,311"
msgstr ""

msgid "911"
msgstr ""

msgid "(pick one)"
msgstr ""

msgid "Local 7 digit"
msgstr ""

msgid "Local 7/10 digit"
msgstr ""

msgid "Toll-free"
msgstr ""

msgid "Long-distance"
msgstr ""

msgid "International"
msgstr ""

msgid "Information"
msgstr ""

msgid "Trunk Sequence for Matched Routes"
msgstr ""

msgid ""
"The Trunk Sequence controls the order of trunks that will be used when the "
"above Dial Patterns are matched. <br><br>For Dial Patterns that match long "
"distance numbers, for example, you'd want to pick the cheapest routes for "
"long distance (ie, VoIP trunks first) followed by more expensive routes "
"(POTS lines)."
msgstr ""

msgid "Move Up"
msgstr ""

msgid "Move Down"
msgstr ""

msgid "Add Trunk"
msgstr ""

msgid "Duplicate Route"
msgstr ""

msgid "remove"
msgstr ""

msgid "Click here to remove this pattern"
msgstr ""

msgid "Route name is invalid, please try again"
msgstr ""

msgid "Route password must be numeric or leave blank to disable"
msgstr ""

msgid "At least one trunk must be picked"
msgstr ""

msgid "Invalid Outbound Caller ID"
msgstr ""

msgid "No dial pattern, there must be at least one"
msgstr ""

msgid "Dial pattern is invalid"
msgstr ""

#, php-format
msgid "Channel %s"
msgstr ""

msgid "Add a Trunk"
msgstr ""

msgid "Add SIP Trunk"
msgstr ""

msgid "Add DAHDI Trunk"
msgstr ""

msgid "Add Zap Trunk"
msgstr ""

msgid "DAHDI compatibility mode"
msgstr ""

msgid "Add IAX2 Trunk"
msgstr ""

msgid "Add mISDN Trunk"
msgstr ""

msgid "Add ENUM Trunk"
msgstr ""

msgid "Add DUNDi Trunk"
msgstr ""

msgid "Add Custom Trunk"
msgstr ""

#, php-format
msgid "%s Channel %s"
msgstr ""

#, php-format
msgid "Edit %s Trunk"
msgstr ""

msgid "DAHDI compatibility Mode"
msgstr ""

#, php-format
msgid "Delete Trunk %s"
msgstr ""

msgid "In use by"
msgstr ""

msgid "route"
msgstr ""

msgid "routes"
msgstr ""

msgid "Sequence"
msgstr ""

msgid "WARNING:"
msgstr ""

msgid "This trunk is not used by any routes!"
msgstr ""

msgid ""
"This trunk will not be able to be used for outbound calls until a route is "
"setup that uses it. Click on <b>Outbound Routes</b> to setup routing."
msgstr ""

#, php-format
msgid "Add %s Trunk"
msgstr ""

msgid ""
"FreePBX offers limited support for DUNDi trunks and additional manual "
"configuration is required. The trunk name should correspond to the "
"[mappings] section of the remote dundi.conf systems. For example, you may "
"have a mapping on the remote system, and corresponding configurations in "
"dundi.conf locally, that looks as follows:<br /><br />[mappings]<br />priv "
"=> dundi-extens,0,IAX2,priv:${SECRET}@218.23.42.26/${NUMBER},nopartial<br /"
"><br />In this example, you would create this trunk and name it priv. You "
"would then create the corresponding IAX2 trunk with proper settings to work "
"with DUNDi. This can be done by making an IAX2 trunk in FreePBX or by using "
"the iax_custom.conf file.<br />The dundi-extens context in this example must "
"be created in extensions_custom.conf. This can simply include contexts such "
"as ext-local, ext-intercom-users, ext-paging and so forth to provide access "
"to the corresponding extensions and features provided by these various "
"contexts and generated by FreePBX."
msgstr ""

msgid "Trunk Name"
msgstr ""

msgid "Descriptive Name for this Trunk"
msgstr ""

msgid "Outbound Caller ID"
msgstr ""

msgid ""
"Caller ID for calls placed out on this trunk<br><br>Format: <b>&lt;"
"#######&gt;</b>. You can also use the format: \"hidden\" <b>&lt;#######&gt;</"
"b> to hide the CallerID sent out over Digital lines if supported (E1/T1/J1/"
"BRI/SIP/IAX)."
msgstr ""

msgid "CID Options"
msgstr ""

msgid ""
"Determines what CIDs will be allowed out this trunk. IMPORTANT: EMERGENCY "
"CIDs defined on an extension/device will ALWAYS be used if this trunk is "
"part of an EMERGENCY Route regardless of these settings.<br />Allow Any CID: "
"all CIDs including foreign CIDS from forwarded external calls will be "
"transmitted.<br />Block Foreign CIDs: blocks any CID that is the result of a "
"forwarded call from off the system. CIDs defined for extensions/users are "
"transmitted.<br />Remove CNAM: this will remove CNAM from any CID sent out "
"this trunk<br />Force Trunk CID: Always use the CID defined for this trunk "
"except if part of any EMERGENCY Route with an EMERGENCY CID defined for the "
"extension/device."
msgstr ""

msgid "Allow Any CID"
msgstr ""

msgid "Block Foreign CIDs"
msgstr ""

msgid "Remove CNAM"
msgstr ""

msgid "Force Trunk CID"
msgstr ""

msgid "Maximum Channels"
msgstr ""

#, php-format
msgid ""
"Controls the maximum number of outbound channels (simultaneous calls) that "
"can be used on this trunk. To count inbound calls against this maximum, use "
"the auto-generated context: %s as the inbound trunk's context. (see "
"extensions_additional.conf) Leave blank to specify no maximum."
msgstr ""

msgid ""
"Controls the maximum number of outbound channels (simultaneous calls) that "
"can be used on this trunk. Inbound calls are not counted against the "
"maximum. Leave blank to specify no maximum."
msgstr ""

msgid "Disable Trunk"
msgstr ""

msgid "Check this to disable this trunk in all routes where it is used."
msgstr ""

msgid "Monitor Trunk Failures"
msgstr ""

msgid ""
"If checked, supply the name of a custom AGI Script that will be called to "
"report, log, email or otherwise take some action on trunk failures that are "
"not caused by either NOANSWER or CANCEL."
msgstr ""

msgid "Dialed Number Manipulation Rules"
msgstr ""

msgid ""
"These rules can manipulate the dialed number before sending it out this "
"trunk. If no rule applies, the number is not changed. The original dialed "
"number is passed down from the route where some manipulation may have "
"already occurred. This trunk has the option to further manipulate the "
"number. If the number matches the combined values in the <b>prefix</b> plus "
"the <b>match pattern</b> boxes, the rule will be applied and all subsequent "
"rules ignored.<br/> Upon a match, the <b>prefix</b>, if defined, will be "
"stripped. Next the <b>prepend</b> will be inserted in front of the <b>match "
"pattern</b> and the resulting number will be sent to the trunk. All fields "
"are optional."
msgstr ""

msgid ""
"Digits to prepend upon a successful match. If the dialed number matches the "
"patterns in the <b>prefix</b> and <b>match pattern</b> boxes, this will be "
"prepended before sending to the trunk."
msgstr ""

msgid ""
"Prefix to remove upon a successful match. If the dialed number matches this "
"plus the <b>match pattern</b> box, this prefix is removed before adding the "
"optional <b>prepend</b> box and sending the results to the trunk."
msgstr ""

msgid ""
"The dialed number will be compared against the <b>prefix</b> plus this "
"pattern. Upon a match, this portion of the number will be sent to the trunks "
"after removing the <b>prefix</b> and appending the <b>prepend</b> digits"
msgstr ""

msgid ""
"You can completely replace a number by matching on the <b>prefix</b> only, "
"replacing it with a <b>prepend</b> and leaving the <b>match pattern</b> "
"blank."
msgstr ""

msgid "+ Add More Dial Pattern Fields"
msgstr ""

msgid "Clear all Fields"
msgstr ""

msgid "Dial Rules Wizards"
msgstr ""

msgid "Always dial with prefix"
msgstr ""

msgid ""
"is useful for VoIP trunks, where if a number is dialed as \"5551234\", it "
"can be converted to \"16135551234\"."
msgstr ""

msgid "Remove prefix from local numbers"
msgstr ""

msgid ""
"is useful for ZAP and DAHDI trunks, where if a local number is dialed as "
"\"6135551234\", it can be converted to \"555-1234\"."
msgstr ""

msgid "Setup directory assistance"
msgstr ""

msgid "is useful to translate a call to directory assistance"
msgstr ""

msgid "Lookup numbers for local trunk"
msgstr ""

msgid ""
"This looks up your local number on www.localcallingguide.com (NA-only), and "
"sets up so you can dial either 7 or 10 digits (regardless of what your PSTN "
"is) on a local trunk (where you have to dial 1+area code for long distance, "
"but only 5551234 (7-digit dialing) or 6135551234 (10-digit dialing) for "
"local calls"
msgstr ""

#, php-format
msgid ""
"Upload patterns from a CSV file replacing existing entries. If there are no "
"headers then the file must have 3 columns of patterns in the same order as "
"in the GUI. You can also supply headers: %s, %s and %s in the first row. If "
"there are less then 3 recognized headers then the remaining columns will be "
"blank"
msgstr ""

msgid "Lookup numbers for local trunk (7-digit dialing)"
msgstr ""

msgid "Lookup numbers for local trunk (10-digit dialing)"
msgstr ""

msgid "Are you sure you want to disable this trunk in all routes it is used?"
msgstr ""

msgid "You have enabled this trunk in all routes it is used"
msgstr ""

msgid "\")"
msgstr ""

msgid ""
"What is the local dialing pattern?\\n\\n(ie. NXXNXXXXXX for US/CAN 10-digit "
"dialing, NXXXXXX for 7-digit)"
msgstr ""

msgid "Invalid pattern. Only 0-9, #, *, Z, N, X and . are allowed."
msgstr ""

msgid ""
"What prefix should be added to the dialing pattern?\\n\\n(ie. for US/CAN, 1"
"+areacode, ie, \\'1613\\')?"
msgstr ""

msgid "Invalid prefix. Only dialable characters (0-9, #, and *) are allowed."
msgstr ""

msgid ""
"What prefix should be removed from the number?\\n\\n(ie. for US/CAN, 1"
"+areacode, ie, \\'1613\\')"
msgstr ""

msgid "Invalid prefix. Only 0-9, #, *, Z, N, and X are allowed."
msgstr ""

msgid "What is the dialing pattern for local numbers after"
msgstr ""

msgid "(ie. NXXNXXXXXX for US/CAN 10-digit dialing, NXXXXXX for 7-digit)"
msgstr ""

msgid ""
"What is the directory assistance number you will dial locally in the format "
"that is passed to this trunk?"
msgstr ""

msgid "Invalid pattern. Only 0-9, #, *"
msgstr ""

msgid "Number to dial when calling directory assistance on this trunk"
msgstr ""

msgid "Invalid number. Only 0-9, #,  and * are allowed."
msgstr ""

msgid "Outbound Dial Prefix"
msgstr ""

msgid ""
"The outbound dialing prefix is used to prefix a dialing string to all "
"outbound calls placed on this trunk. For example, if this trunk is behind "
"another PBX or is a Centrex line, then you would put 9 here to access an "
"outbound line. Another common use is to prefix calls with 'w' on a POTS line "
"that need time to obtain dial tone to avoid eating digits.<br><br>Most users "
"should leave this option blank."
msgstr ""

msgid "Outgoing Settings"
msgstr ""

msgid "Zap Identifier"
msgstr ""

msgid ""
"ZAP channels are referenced either by a group number or channel number "
"(which is defined in zapata.conf).  <br><br>The default setting is <b>g0</b> "
"(group zero)."
msgstr ""

msgid "DAHDI Identifier"
msgstr ""

msgid ""
"DAHDI channels are referenced either by a group number or channel number "
"(which is defined in chan_dahdi.conf).  <br><br>The default setting is "
"<b>g0</b> (group zero)."
msgstr ""

msgid "mISDN Group/Port"
msgstr ""

msgid ""
"mISDN channels are referenced either by a group name or channel number (use "
"<i>mISDN Port Groups</i> to configure)."
msgstr ""

msgid "Custom Dial String"
msgstr ""

msgid "Define the custom Dial String.  Include the token"
msgstr ""

msgid "wherever the number to dial should go.<br><br><b>examples:</b><br>"
msgstr ""

msgid "DUNDi Mapping"
msgstr ""

msgid ""
"This is the name of the DUNDi mapping as defined in the [mappings] section "
"of remote dundi.conf peers. This corresponds to the 'include' section of the "
"peer details in the local dundi.conf file. This requires manual "
"configuration of DUNDi to use this trunk."
msgstr ""

msgid "Give this trunk a unique name.  Example: myiaxtel"
msgstr ""

msgid "PEER Details"
msgstr ""

msgid ""
"Modify the default PEER connection parameters for your VoIP provider."
"<br><br>You may need to add to the default lines listed below, depending on "
"your provider.<br /><br />WARNING: Order is important as it will be "
"retained. For example, if you use the \"allow/deny\" directives make sure "
"deny comes first."
msgstr ""

msgid "Incoming Settings"
msgstr ""

msgid "USER Context"
msgstr ""

msgid ""
"This is most often the account name or number your provider expects."
"<br><br>This USER Context will be used to define the below user details."
msgstr ""

msgid "USER Details"
msgstr ""

msgid "Modify the default USER connection parameters for your VoIP provider."
msgstr ""

msgid ""
"You may need to add to the default lines listed below, depending on your "
"provider..<br /><br />WARNING: Order is important as it will be retained. "
"For example, if you use the \"allow/deny\" directives make sure deny \n"
"\t\t\t\tcomes first."
msgstr ""

msgid "Registration"
msgstr ""

msgid "Register String"
msgstr ""

msgid ""
"Most VoIP providers require your system to REGISTER with theirs. Enter the "
"registration line here.<br><br>example:<br><br>username:password@switch."
"voipprovider.com.<br><br>Many providers will require you to provide a DID "
"number, ex: username:password@switch.voipprovider.com/didnumber in order for "
"any DID matching to work."
msgstr ""

msgid "Duplicate Trunk"
msgstr ""

msgid "insert"
msgstr ""

msgid "Click here to insert a new pattern"
msgstr ""

msgid "Invalid Maximum Channels"
msgstr ""

msgid "Invalid Dial Rules"
msgstr ""

msgid ""
"The Outbound Dial Prefix contains non-standard characters. If these are "
"intentional the press OK to continue."
msgstr ""

msgid "Invalid Trunk Name entered"
msgstr ""

msgid "Invalid Custom Dial String entered"
msgstr ""

msgid "Trunk Name and User Context cannot be set to the same value"
msgstr ""

msgid "User Context was left blank and User Details will not be saved!"
msgstr ""

msgid ""
"You must define an Outbound Caller ID when Choosing this CID Options value"
msgstr ""

msgid ""
"It is highly recommended that you define an Outbound Caller ID on all "
"trunks, undefined behavior can result when nothing is specified. The CID "
"Options can control when this CID is used. Do you still want to continue?"
msgstr ""

msgid ""
"You have not entered a User Password.  While this is acceptable, this user "
"will not be able to login to an AdHoc device.\\n\\nAre you sure you wish to "
"leave the User Password empty?"
msgstr ""

msgid "Add Channel"
msgstr ""

msgid "Edit Zap Channel: "
msgstr ""

msgid "Add Zap Channel"
msgstr ""

msgid ""
"Zap Channel DIDs allow you to assign a DID to specific Zap Channels. You can "
"supply the same DID to multiple channels. This would be a common scenario if "
"you have multiple POTS lines that are on a hunt group from your provider. "
"You MUST assign the channel's context to from-zaptel for these settings to "
"have effect. It will be a line that looks like:<br /><br />context = from-"
"zaptel<br /><br />in your zapata.conf configuration effecting the specified "
"channel(s). Once you have assigned DIDs you can use standard Inbound Routes "
"with the specified DIDs to route your calls."
msgstr ""

msgid "Edit Channel"
msgstr ""

msgid "Channel"
msgstr ""

msgid "The Zap Channel number to map to a DID"
msgstr ""

msgid "A useful description describing this channel"
msgstr ""

msgid "DID"
msgstr ""

msgid ""
"The DID that this channel represents. The incoming call on this channel will "
"be treated as if it came in with this DID and can be managed with Inbound "
"Routing on DIDs"
msgstr ""

msgid "Delete"
msgstr ""

msgid ""
"DID information is normally just an incoming telephone number.\\n\\nYou have "
"entered a non standard DID pattern.\\n\\nAre you sure this is correct?"
msgstr ""

msgid ""
"You appear to be using a converted DID in the form of zapchanNN that was "
"automatically generated during an upgrade. You should consider assigning the "
"DID that is normally associated with this channel to take full advantage of "
"the inbound routing abilities. Changing the DID here will require you to "
"make changes in the Inbound Routes tab. Do you want to continue?"
msgstr ""