id,summary,reporter,owner,description,type,status,priority,milestone,component,version,resolution,keywords,cc,confirmation,distro,engine,distro_ver,engine_version,svn_rev
1517,Allow substitution of 11 for * at start of a feature code,Wild Goose,,Traditional telephone companies have long allowed customers to dial 11xx rather than *xx on most feature codes - originally this was put in place for rotary dial phones that didn't have * on the dial.  But with VoIP_ there is another use - to bypass built-in feature codes in some adapters.  For example_ in the Sipura/Linksys adapters_ *70 means cancel call waiting for the next call only_ whereas in FreePBX it is used to enable call waiting.  If there were a checkbox on the page that would simply allow the use of 11xx in addition to *xx_ then Sipura adapter users could be instructed to dial 11xx to turn on call waiting (after which *70 on their adapter should work as expected).\r\n\r\nSo my suggestion is_ put a checkbox near the bottom of the Feature codes pages that says:\r\n\r\n[] Allow user to replace * with 11 at start of feature codes.\r\n\r\nAnd if that box is checked_ make it so that either code will manipulate the feature.\r\n\r\nI do realize that as a stopgap you can set up a custom extension (example_ make a custom extension 1170 and put Local/*70@from-internal in the Dial field) but it would be rather cumbersome to do that for all the feature codes.,Feature Requests,new,minor,Undetermined,Feature Code Admin,SVN-HEAD,,,,,,All,,,