skype for asterisk

2 posts / 0 new
Last post
byaru1
byaru1's picture
skype for asterisk

Folk,

I'm trying to setup skype for asterisk. I'm using asteriskNOW 1.5, have setup the skype for asterisk using their readme. I would like to nos use FreeBBX to setup trunks, outbound and inbound routes.

Has anyone done this before? Please assist.

eb

byaru1
byaru1's picture
skype for asterisk setup

All,

Please assist - I would like to setup an outbound trunk for making skype to pstn calls using sfa. I keep getting the message "all circuits are busy.."

log follows:

-- Executing [s@macro-dialout-trunk:24] GotoIf("SIP/220-b7da9c98", "1?outnum:skipoutnum") in new stack
-- Goto (macro-dialout-trunk,s,25)
-- Executing [s@macro-dialout-trunk:25] Set("SIP/220-b7da9c98", "the_num=254678986543") in new stack
-- Executing [s@macro-dialout-trunk:26] Dial("SIP/220-b7da9c98", "Skype/254678986543,300,") in new stack
-- Couldn't call 254678986543
== Everyone is busy/congested at this time (0:0/0/0)
-- Executing [s@macro-dialout-trunk:27] Goto("SIP/220-b7da9c98", "s-CHANUNAVAIL,1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/220-b7da9c98", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/220-b7da9c98", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 0) - failing through to other trunks") in new stack
-- Executing [6254678986543@from-internal:5] Macro("SIP/220-b7da9c98", "outisbusy,") in new stack
-- Executing [s@macro-outisbusy:1] Playback("SIP/220-b7da9c98", "all-circuits-busy-now,noanswer") in new stack
-- Playing 'all-circuits-busy-now.ulaw' (language 'en')
-- Executing [s@macro-outisbusy:2] Playback("SIP/220-b7da9c98", "pls-try-call-later,noanswer") in new stack
-- Playing 'pls-try-call-later.ulaw' (language 'en')
-- Executing [s@macro-outisbusy:3] Macro("SIP/220-b7da9c98", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/220-b7da9c98", "vw") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/220-b7da9c98", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/220-b7da9c98", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/220-b7da9c98", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/220-b7da9c98", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/220-b7da9c98", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/220-b7da9c98' in macro 'hangupcall'
== Spawn extension (macro-outisbusy, s, 3) exited non-zero on 'SIP/220-b7da9c98' in macro 'outisbusy'
== Spawn extension (from-internal, 6254678986543, 5) exited non-zero on 'SIP/220-b7da9c98'
-- Executing [h@from-internal:1] Macro("SIP/220-b7da9c98", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/220-b7da9c98", "vw") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/220-b7da9c98", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/220-b7da9c98", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/220-b7da9c98", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/220-b7da9c98", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/220-b7da9c98", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/220-b7da9c98' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/220-b7da9c98'