Farewell Andrew

Great Job Andrew!

It’s been several years since I’ve blogged here and I’m honored to have the privilege of wishing Andrew the best on his future endeavors! For those that don’t know me, I used to run FreePBX prior to Andrew taking the helm so it only seemed appropriate that I have the opportunity to wish Andrew the best and further reflect on where FreePBX has been and is going!

Andrew has had a wonderful journey through his involvement and influence on FreePBX and the Asterisk world. The marks that he’s made on the project will continue for years to come. He has had his hands on so many different aspects of the project that I couldn’t even begin to enumerate everything he’s touched! Luckily we have ‘git blame’… Since I haven’t been involved in the day to day goings of FreePBX I thought I’d touch on my views and reflections of the attributes of a successful Open Source project like FreePBX.

I’ll start with some minor reminiscing of my own. My involvement started at the end of 2005, before there was even a FreePBX as it was still called AMP (Asterisk Management Portal) and just prior to Rob Thomas taking over the project. The database schema at the time comprised of 8 tables if I recall correctly, sip, iax, zap and extensions, and a few others. In my case I had just left the corporate world looking for something more fun to do and wanting to get back into telecom. I hooked up with a good friend who had been playing around in this space and immersed myself in this new world.

Rob Thomas had been running the project but other life priorities were competing for his time so I ended up taking it over. This was a time during the FreePBX life that I equated to the 60’s. It was a wild and free time where any and every contribution thrown at the project was getting absorbed without any real structure or planning or release management. It was a great period of growth and recognition but at the time, with the popularity of Asterisk@Home FreePBX was taking off and there was a huge boom in the commercialization of and adoption of FreePBX and Asterisk.

Upon taking over, it was my goal to provide stabilization for the project while continuing to keep it a vibrant and creative environment. These are somewhat opposing forces but necessary to make sure it would come out as an innovative project that thousands of resellers could build dependable businesses and millions of installations could result. During my tenure I accepted the help of energetic and significant forces in the community, whether individuals who came and left or significant players such as Schmooze, with whom I eventually joined forces. The goal was a continued and vibrant creative base to make sure that FreePBX excelled and at the same time, a strong supporter who eventually became Sangoma after FreePBX’s path through Bandwidth.com and then Schmooze who merged with Sangoma.

One underlying force behind Open Source is the collective and ever shifting brain trust that the openness nurtures. It’s through this combination of the constant giving back to the project, and the continuous inflow of new ideas as significant contributors enter the project for their tenure before moving on. Just as this cycling of various community members fuels the innovation in a project, so does the life cycle of its various leaders. Rob Thomas had a charisma and openness to invite the huge influx of contributions during the project’s early days at a time when that’s what it needed. Although Rob could never say ‘no’ and it resulted in plenty of headaches that took years to undo, it was also absolutely the right thing to do. It gave momentum, ideas, innovation and fuel to a great project. I was able to take that momentum and steer it in a direction to give stability and confidence while continuing to allow innovation but at the same time, occasionally having to say no. That took it well into the Schmooze days when we began the transition to let a new wave of creative energy take FreePBX to the next level and move Andrew into the role to take it somewhere I never could have.

Andrew’s leadership has taken the project to new levels that would never have happened had I stayed at the helm. The work that Andrew did, as well as Rob who resurfaced after a 5 year sabbatical, and James, Jason, Kapil, Philip, Mohit, Franck and others is simply astounding. Andrew has led the project through total rewrites and architectural enhancements of everything from its underlying core to the server side infrastructure that supports FreePBX to the surrounding ecosystems such as Zulu and beyond.

I’m very excited about what is possible going forward. For the first time in over a decade we’ve brought the two underlying technologies of FreePBX and Asterisk under a common umbrella. This has been an evolution that was once ridden by old school grumpy “real men program in dialplan” … they don’t use GUIs. Fast forward 14 years and we have these two symbiotic technologies under one roof. I know all of us who have been close to the project, whether visibly active or silently watching, won’t be far in keeping tabs on what this recent marriage can do in taking FreePBX into its next leap into the future.

For now, please join me in giving a huge thanks to the contributions that Andrew has achieved in his leadership and wishing him well in his next endeavors. Thank you Andrew!

To read Andrew’s post check it out here: https://www.freepbx.org/an-open-source-journey/

-Philippe Lindheimer

To participate in the conversation about this post go here: https://community.freepbx.org/t/farewell-andrew/58812

An Open Source Journey

When asked in high school back in 2003 what I wanted to do when I ‘grew up’ I had always said I wanted to work in both technology and technical theater. Over the last 16 years I’ve watched as the world of technical theatre expanded as a result of implementing new technologies. As a result of this I often found myself at the forefront of learning how to manage these new technologies in the theatrical world which one day in 2008 lead me to discovering Asterisk and FreePBX. I had just graduated from California State Fullerton University in June and I was working part time maintaining the network at an event production company and part time as a freelance theatrical sound engineer.

As the story goes, one day I was sitting at the desk at the event production company using a Grandstream GXP 2000 when I noticed the phone wasn’t connected with a standard RJ11 connector but instead was connected with an RJ45 connector. Fascinated, I then went through the menus of the GXP and realized this wasn’t the normal copper telephone I grew up with (and yes I am ‘old’ enough to have used copper telephones). Digging deeper I discovered the IP address that the phone was registered to and attempted a connection to it.

This looks pretty similar to what I saw the first time I logged into the machine

When I connected to that IP address I discovered the world of… Trixbox, funnily enough. Unfortunately I didn’t have the username and password for the interface and since it was a Friday I knew I wouldn’t get a response from the IT company that was hired before me to get the password from them. I was, however, curious as to what a ‘trixbox’ was. I also noticed normal copper RJ11 jacks on the back of the machine and I was fascinated that you could connect your home or business telephone system directly into a computer for telephone questions.

So I did what any reasonable 23 year old does, I found the download for trixbox and attempted to reformat the entire machine and so began the weekend where I dove head first into the world of Asterisk/FreePBX/Trixbox. At some point while installing the trixbox media I noticed that Trixbox was a clone of a product called FreePBX. I went to the FreePBX website downloaded FreePBX (there was no easy FreePBX distro back then!) and tried to make it work to no avail. Since I formatted the machine with previous trixbox media, the company I worked for no longer had a working phone system. Luckily it was a Saturday afternoon.

The FreePBX website circa the time I discovered FreePBX

Over the course of the weekend I learned more about Asterisk, TDM, and FreePBX cards than I ever thought I would. At some point over the weekend I got Asterisk to recognize the TDM card and the telephone system was back online and I thought all was going to be right with the world. Yet I ended up being very intrigued by this “Free” telephone system and all of it’s features and the power it contained.

The original Polycom 501. Still in operation today at the event production company

The only problem I had at this juncture was that the phones in the office didn’t know how to connect to Asterisk anymore. The phones I decided to work on first were in the boss’s office. A Polycom 501. I thought to myself “how hard could it be to configure this thing”. Boy was I wrong.

After dealing with polycom provisioning for what seemed like hours, I next attempted to configure the grandstream gxps. Although these weren’t as hard as the polycoms I continued to ask myself why there wasn’t an easier way to configure these phones remotely. They all seemed to support dynamic DHCP and TFTP options to retrieve configuration files but all attempts at scouring the internet returned only results of people configuring these devices manually.

Around this time I discovered the PBX-in-a-Flash distribution and the community that surrounded it. At the time it seemed like a far more vibrant and active community that the FreePBX forums. There I found a post announcing a GUI for configuring phones for FreePBX written by a forum user named John Mullinix. I sent him a quick private message (that I still have!)

Hi John,

My name is Andrew Nagy and I was a former trixbox user for about a year. I loved how easy it was to use their endpoint manager but their implementation of FreePBX and Asterisk was rather weak I thought, which is why I came over to PBX in a Flash. When I saw your project for an endpoint manager I thought it was pretty cool. And so far it’s worked wonders but I wanted to know if I would be able to help out with coding on the project. I have a ton of PHP (4–5) and MySQL(4–5) experience. My information on projects.colsolgrp.net is tm1000. Same as here. I’ve worked with Linksys PAP2, Polycom and Grandstream phones. Specifically I’ve programed functions on the Grandstreams such as XML screens and such and I’ve worked with gd on PHP which is especially interesting as it’s compiled with PHP on PBX in a flash which perhaps could be used with endpoint manager for uploading personal images to phones. etc.

What other information do you need specifically?

I received a reply almost instantaneously

Thanks for volunteering Andrew. Tony [Shiffer] has anticipated my request and you have been added to the project.

If you need to call, you can reach me at




My email is <redacted>

Thanks again.

I then began to work feverishly on rewriting Endpoint Manager for FreePBX for an open source initiative group named Col Sol Projects. They mainly had open source projects for FreePBX such as CID Superfecta and of course Endpoint Manager. This is where I ended up meeting Lorne Gaetz through his contributions to CID Superfecta. However their Endpoint manager ran separately from FreePBX itself. So I took the opportunity to learn about FreePBX internals to be able to re-write Endpoint Manager into FreePBX itself.

Open Source Endpoint Manager in it’s early days

I continued to work on Endpoint Manager in my spare time throughout 2009.

It’s around this time that I also ran into the blogger named “Michigan Telephone” and started reading his blogs about FreePBX and I started actively following the blogs from Philippe Lindheimer of FreePBX. I also worked on a few other modules you might not have ever heard of, including swiss army knife, which included some things I felt the community wanted but weren’t in FreePBX (like the ability to add old school dial patterns in inbound and outbound routes). I also wrote the motif module, which allowed users to use Google Voice and I based that work off of Marcus Brown’s original Google Voice module. Marcus wrote code for the original Jabber implementation and I did a module based on the Motif implementation.

Then one day in June of 2010 I got an email from a “Tony Lewis” of Schmoozecom asking me if I would give him and Philippe a call. The next thing I knew I was a ‘contributing’ developer to the FreePBX codebase and Endpoint Manager was distributed to FreePBX systems all over the world.

Around this time I also met Darren Schreiber and Patrick Sullivan of 2600hz. Two stellar guys. I even went up to work on provisioning services for them in San Francisco from time to time. At one point a few months later I almost ended up giving up on Endpoint Manager after an altercation with a FreePBX developer who is no longer around. That is the first time I met Bryan Walters, also of Schmoozecom. He encouraged me to not listen to said developer and to keep participating in the community and in Endpoint Manager.

Sometime in the early summer of 2012 Tony Lewis asked me if I wanted to go to Astricon. I gladly accepted and flew out to Atlanta in the fall of 2012. There I meet in person; Tony Lewis, Luke Duquaine, Philippe Lindheimer, Bryan Walters and Preston McNair of Schmoozecom and Jason Parker and Josh Colp of Asterisk.

By the summer of 2013 I was officially working for Schmoozecom on FreePBX under the direction of Philippe Lindheimer and over the years I gained more responsibility within the FreePBX project. The Schmoozecom years were a period of massive growth for the FreePBX project, the company hired James Finstrom (formerly of Rhino), Jason Parker (from Digium) and Rob Thomas (who pretty much created ‘FreePBX’ as you know it today). Rob, Jason, Bryan, Tony, James, Luk, Philippe and I created fwconsole, we fixed the installer, we fixed autoloading so it’d work and Rob Thomas added what’s now known as BMO, which changed the game for FreePBX turning it into a more object oriented code base. You’d also probably be surprised to know that I never worked on the commercial FreePBX Endpoint Manager. Luke Duquaine ran that originally then passed it off to Jason Parker who passed it off to Kapil Gupta, who still works on it today.

Sangoma later acquired Schmoozecom on January 1, 2015 which gave FreePBX more global recognition than it ever had before. At some point in the last few years Philippe moved on to other aspects of Sangoma’s business operations (he actually still works for Sangoma!) while I became project lead for FreePBX.

In the years that followed the FreePBX team accomplished several goals support for PHP 5.6 and we brought in and implemented more object oriented concepts. We had 3 releases: 12,13,14 and soon we will have 15. I’ve gone to every Astricon since 2012 (So 7 years!) and I’ve met so many wonderful members of the community here and on the forums. I’ve really treasured my time running this project. If you’ve read my posts on the forums or followed me for any length of time on here you’d probably think I was pretty blunt/rude in my replies. However I did care about what each and every one of you posted and often brought it up to Rob, Tony, Bryan, Jason and Philippe when we all worked together on FreePBX to find solutions for people’s issues. I am the type of person that tries to give facts as they are, without “fluffing” it up. If I’ve offended you in the past I am sorry for that, but I hope my contributions to the project make up for that. Looking back I remember a previous developer conference we had in Neenah Wisconsin (the former HQ of Sangoma US) where the community said Yealink phones were having issues with FreePBX 14 and Rob Thomas and I walked to the “Schmoozecom wall of phones” pulled down a Yealink and worked on trying to figure out the issues together for a whole day. Those are times I truly treasure with the FreePBX project and the community, including YOU!

Over this last summer Sangoma and Digium merged into one company and we gained a huge array of wonderful Asterisk developers (not only developers but the entire Digium staff). For once I was finally able to work directly with Matthew Fredrickson, Joshua Colp and George Joseph. All Asterisk developers that I used to communicate with only over IRC. I also had the pleasure of spending time working with the Switchvox team in San Diego and I can’t express how welcoming the entire Digium team has been. You might have noticed a few of them participating in the forums recently.

One of the last major projects I was able to work on was something I’ve been ‘hotly’ involved in over the last year and that is FreePBX CPU utilization, you can read more about that in my performance improvements post here: https://community.freepbx.org/t/performance-improvements-in-freepbx/57016. But also our recent Framework upgrades that consolidate all of our crons in the Asterisk user’s crontab into a single cron in PHP, this allows all FreePBX cron code to run in “sequence” and only have a single startup cost, we think you as the community will really enjoy these changes.

After much thought and deliberation I’ve decided that it’s time for me to move on to new opportunities. I’ve worked with FreePBX and Asterisk for a little over 10 years (since the fall of 2008). I’ve worked professionally in open source technologies during my entire time at Sangoma and Schmoozecom. Over the last 10 years I’ve learned so much about the open source community and I really do love it. I’ve met so many wonderful people at Astricon and online through various mediums (the forums, dslreports, reddit, IRC). I’ve seen how much FreePBX has affected other people’s lives. I’ve seen and heard about the major places it’s used and even the minor places and the impact it’s had on businesses. Hopefully you can see how much it’s affected mine. However, everyone has an expiration date and I’ve finally reached that time. I’m excited about what the future holds for me and hopefully I’ll run into you all around the community in the future. My last day with Sangoma will be this Friday (The 17th of May).

Taking my place will be Matt Fredrickson of the Asterisk project. Matt will now be the manager for both the Asterisk and FreePBX projects. He’s been working with Digium since the early days and has an employee number almost as low as Malcolm Davenport. Matt’s been in charge of the Asterisk Open Source project for the last few years and he’s done a stellar job at it. I have no doubt that his leadership will help continue to grow FreePBX in this new era.

I want to encourage all of you that FreePBX itself is in a very strong place. The team is working hard to release a few wonderful additions in the next year and I wouldn’t be surprised if FreePBX fully supports PHP 7.2 in the next year!

Thanks for the great years FreePBX community. You are all great in your own individual ways!



To participate in the conversation around this blog join us at: https://community.freepbx.org/t/an-open-source-journey/58756/17

Sangoma 7.6 Distro GA

If you’ve been around the forums long enough you’ve probably seen posts and comments from our staff and even our users referring to the “Sangoma 7 Distro” or “SNG7”. The Sangoma Distro is a derivative of CentOS which itself is a Linux distribution that provides a free, enterprise-class, community-supported computing platform functionally compatible with its upstream source, Red Hat Enterprise Linux (RHEL). This means that the Sangoma Distro itself is a variant of Red Hat. The “7” references the “7” in the CentOS Distro and RHEL 7.

The Sangoma Distro started it’s life close to 10 years ago as the Schmooze Distro (way back with CentOS 5) and slowly morphed/grew/upgraded into the FreePBX Distro and now the Sangoma Distro. It’s seen many iterations over the last 10 years but it is still primarily based on the CentOS and RHEL distro releases. Which gives FreePBX stability from upstream Red Hat.

On top of that the Sangoma 7 Distro also includes access to the EPEL repository, also known as “Extra Packages for Enterprise Linux”. Extra Packages for Enterprise Linux (or EPEL) is a Fedora Special Interest Group that creates, maintains, and manages a high quality set of additional packages for Enterprise Linux, including, but not limited to, Red Hat Enterprise Linux (RHEL), CentOS and Scientific Linux (SL), Oracle Linux (OL).

EPEL packages are usually based on their Fedora counterparts and will never conflict with or replace packages in the base Enterprise Linux distributions. EPEL uses much of the same infrastructure as Fedora, including buildsystem, bugzilla instance, updates manager, mirror manager and more.

What this means for you, the end user, is access to hundreds of other RPMs for your FreePBX system that you can use to enhance your product. Additionally the Sangoma team also builds PHP 5.6 (which is used by FreePBX 14) and NodeJS 8.16.0 (used by some of our commercial products).

A few weeks ago we announced (https://community.freepbx.org/t/sng-7-6-testing-release/58142) that the CentOS 7.6 updates, released by CentOS back in October 2018, were now available to FreePBX users in the Sangoma Distro through our testing repository. This is, in large part, thanks to the collaborative efforts of engineers at Digium and Sangoma working together. Matteo Bignotti, who joined Sangoma as a part of the Digium acquisition, was one of those engineers and I want to briefly highlight him in this post.

Matteo is a true blue Italian, originating from the sunny city of Milano over 30 …plus a few more… years ago. With his seductive accent and a talent for BSD/Linux applications, Matteo pursued a career as a web programmer back in the late 90s working together with Telecom Italia at their MMS/sms portal delivering content to their users. His technological thirst was not quenched though, and he knew he could not stop his quest for knowledge. It was one spring day in 2005 that he discovered the intricacies of phone systems with Asterisk and Switchvox and set upon what he thought would surely be a new career path.

After working at several personal Asterisk projects, Matteo had a revelation. While he truly appreciated his new skill, he realized his efforts would be better spent writing code as a result of his unique ability to see instinctively how systems should interact; and how to make them work. It was then Matteo recognized his true calling had been right all along as a system developer he joined the Switchvox team in 2012 and quickly owned the distribution and has been working tightly with CentOS ever since.

As a result of his versatility, extensive experience and savvy familiarity with all things web, mobile, client and server, he constantly rises to any challenge thrown at him and loves every minute of it.

Favorite quote: “I had a broken watch once and even it was right twice a day”

So now you know a little bit more about Matteo and his experience working with CentOS and how that has already benefited the FreePBX Distro. Moving forward we hope to have Matteo more involved in helping with the FreePBX “SNG” 7 distro.

About a week ago our QA team notified us that the SNG 7.6 upgrades were ready to go into “GA” (General Audience) release. Therefore, we are proud to announce that the QA cycle has completed and as of last week we pushed the release of 7.6 into our stable branches. Which means if you ran a yum upgrade on your system you were presented with well over 200 packages to upgrade. Many including performance and security fixes and at no cost to you.

For more information you can see our release notes here: https://wiki.freepbx.org/display/PPS/SNG7+PBX+Release+Notes

We have also updated our downloadable distro, in which we removed the ability to install Asterisk 15 from a base install (it’s now End of Life) and upgraded our base Asterisk versions to 13.22.0 and 16.3.0 which are both selectable at installation time. To download the distro and try out the updated installer checkout our downloads page: https://www.freepbx.org/downloads/freepbx-distro/

One more thing:  Have you always longed for the day where you could install Asterisk Certified on Sangoma 7 and utilize it with FreePBX? Well, today’s your day! If you’d like to test out Asterisk Certified on your Sangoma 7 FreePBX system you’ll just need to run the following commands (note this is only in the testing repo):

yum install sangoma-devel
yum upgrade asterisk-version-switch

Then select Asterisk 13 Certified

From all of us here at Sangoma, Thanks for using FreePBX!